CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   Ability to Generate a Grid with Steps in Shroud Geometry (http://www.cfd-online.com/Forums/numeca/93202-ability-generate-grid-steps-shroud-geometry.html)

jonny_b October 7, 2011 14:43

Ability to Generate a Grid with Steps in Shroud Geometry
 
1 Attachment(s)
I am just getting into Numeca Autogrid and was wondering if it is capable of generating a grid when a 90deg forward facing step exists in the geometry. I have attached an image showing this step. The step is located just upstream of the inlet guide vane so the axial location is free from any airfoils.

Thanks for any feedback,
Jonny B


All times are GMT -4. The time now is 04:40.