mesh spacing

jinpeng19861213 · December 19, 2011, 03:23

Dear all,
Is there anyone can explain the meaning of mesh spacing? I can not understand this.
Thanks in advance. Waiting for your reply.
Jin

oldshoes81 · December 29, 2011, 19:15

Hi,

Could i know what mesher you are using?

jinpeng19861213 · January 3, 2012, 23:42

Hi,
I am sorry for replying to you now.
I use Autogrid of Numeca soft package
Thanks!

oldshoes81 · January 13, 2012, 21:38

Hi,

If you refer to flow path, it is the '1D' mesh plotted along the streamline and the grid point could be spaced accordingly. I hope this will answer your question.

jinpeng19861213 · January 14, 2012, 08:37

Thank you very much!

What about when it is Blade to Blade?

oldshoes81 · January 14, 2012, 19:31

Hi,

Blade to blade is so called the '2d' mesh where we will control the number of grid user the available template. We are actually controlling the grid number from global value to its local points.

December 19, 2011, 03:23	mesh spacing	#1
jinpeng19861213 New Member jinpeng Join Date: Dec 2011 Posts: 3 Rep Power: 2	Dear all, Is there anyone can explain the meaning of mesh spacing? I can not understand this. Thanks in advance. Waiting for your reply. Jin

December 29, 2011, 19:15		#2
oldshoes81 Member CJ Join Date: Apr 2010 Location: Malaysia Posts: 35 Rep Power: 4	Hi, Could i know what mesher you are using? __________________ Regards CJ NUMIT Enterprise, Malaysia +6 017 656 3436 http://maccom-numit.blogspot.com http://www.numit.com.my Email : seiko.q@numit.com.my

January 13, 2012, 21:38		#4
oldshoes81 Member CJ Join Date: Apr 2010 Location: Malaysia Posts: 35 Rep Power: 4	Hi, If you refer to flow path, it is the '1D' mesh plotted along the streamline and the grid point could be spaced accordingly. I hope this will answer your question. __________________ Regards CJ NUMIT Enterprise, Malaysia +6 017 656 3436 http://maccom-numit.blogspot.com http://www.numit.com.my Email : seiko.q@numit.com.my

January 14, 2012, 19:31		#6
oldshoes81 Member CJ Join Date: Apr 2010 Location: Malaysia Posts: 35 Rep Power: 4	Hi, Blade to blade is so called the '2d' mesh where we will control the number of grid user the available template. We are actually controlling the grid number from global value to its local points. __________________ Regards CJ NUMIT Enterprise, Malaysia +6 017 656 3436 http://maccom-numit.blogspot.com http://www.numit.com.my Email : seiko.q@numit.com.my

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 3, 2012, 23:42		#3
jinpeng19861213 New Member jinpeng Join Date: Dec 2011 Posts: 3 Rep Power: 2	Hi, I am sorry for replying to you now. I use Autogrid of Numeca soft package Thanks!

January 14, 2012, 08:37		#5
jinpeng19861213 New Member jinpeng Join Date: Dec 2011 Posts: 3 Rep Power: 2	Thank you very much! What about when it is Blade to Blade?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
non-smooth mesh	Svensson	OpenFOAM Native Meshers: snappyHexMesh and Others	11	January 18, 2012 09:13
Mesh motion with Translation & Rotation	Doginal	CFX	0	August 3, 2011 16:37
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	Ansys Meshing & Geometry	47	March 14, 2011 16:13
3D Hybrid Mesh Errors	DarrenC	Ansys Meshing & Geometry	6	November 2, 2010 21:02
2d irregular grid	Remy	Main CFD Forum	1	December 22, 2008 04:49