CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   AutoBlade/CFD Screening (http://www.cfd-online.com/Forums/numeca/95592-autoblade-cfd-screening.html)

shahed.malekipour December 23, 2011 12:58

AutoBlade/CFD Screening
 
Hello all,
I am interested in numerical optimization using
NUMECA, Fine/Design3D. I have previously worked with the Fine solver
for numerical simulation of Rotor37 and other profiles. But in
AutoBlade/CFD Screening when I import the parameterized Rotor37 and
perform the settings of computation task and press the start button,
it gives me no error but the process no longer continues! The massage
is
"start_status_ok
Reconnected_to_other_Fine_Sesion"
It would be kind of you if you help me what the defect is.:(
Regards

Hamidzoka May 29, 2012 03:17

Dear Shahed;
this is perhaps due to your .dll files.
check if your installation folder has got all required .dll files.

regards


All times are GMT -4. The time now is 00:11.