NUMECA

Page 2 of 10

Threads in Forum : NUMECA

Rating Thread / Thread Starter	Last Post	Replies	Views
Parallel Simulation Numeca Fine daxterss	September 11, 2012 22:00 by oldshoes81	5	567
Question about skewness angle criteria lnk	September 6, 2012 10:43 by lnk	0	326
wind gradient for sailing boat laurent98	August 21, 2012 04:54 by Eloise	1	376
(AutoGRID 5) Problem in Geometry definition of propeller venkat_aero2007	July 31, 2012 14:05 by venkat_aero2007	14	1,098
Help need to simulate flow around Contra rotating Fan venkat_aero2007	July 31, 2012 14:01 by venkat_aero2007	0	401
autogrid problem in defining semi-open imepller masood	July 30, 2012 08:50 by masood	0	335
AutoGrid5 Axial Turbine Meshing Error zoeburton1987	July 17, 2012 23:21 by Hamidzoka	8	428
Negative cells in AutoGrid funmaker	July 17, 2012 05:34 by venkat_aero2007	4	1,231
Import Exisiting Meshes into NUMECA zoeburton1987	July 13, 2012 12:26 by zoeburton1987	1	390
Help for Autoblade Fitting stewart	July 7, 2012 08:01 by majid2792	15	1,497
problem to defined the geometry in autogrid 5 windmechy	June 16, 2012 10:00 by qiba123	9	529
Row 1 optimization failed Iskandar89	June 11, 2012 10:04 by Azzul	2	421
!stack error: Space already allocated fornmbufp xvrixiyang	June 6, 2012 14:26 by xvrixiyang	0	362
AutoBlade/CFD Screening shahed.malekipour	May 29, 2012 03:17 by Hamidzoka	1	738
Azimuthal averaged solution ArslanOZCAN	May 28, 2012 02:32 by oldshoes81	10	1,080
simulation on wind turbine... qiba123	May 27, 2012 21:47 by oldshoes81	1	512
negative efficiency sajad	May 22, 2012 10:07 by sajad	0	423
about boundary conditions whoami	May 11, 2012 07:45 by yujiabeizi	1	739
Import CAD model sajad	May 2, 2012 04:15 by JohnnyB	6	1,229
NUMECA-Optimization of pump design using FINE/Design3D mahdi balali	May 1, 2012 11:02 by sajad	9	1,347
target cell size for the internal free surface laurent98	April 24, 2012 18:37 by Rombzh	1	438
problem with launch fitting sajad	April 24, 2012 04:30 by sajad	1	495
efficiency majid2792	April 14, 2012 12:00 by majid2792	0	450
Vnoise daxterss	April 10, 2012 02:24 by daxterss	0	402
Aerodynamic coefficients daxterss	April 10, 2012 02:20 by daxterss	2	724
Cylinder moving simulation with fine/hexe210_2 sirzhyl	April 9, 2012 09:24 by sirzhyl	0	373
Run two different flows risku9	April 5, 2012 21:06 by oldshoes81	1	451
error in fine design3d majid2792	April 3, 2012 03:23 by Hamidzoka	1	446
optimization problem mhessen_aziz	March 26, 2012 05:16 by mhessen_aziz	0	414
Transition Laminar-Turbulent daxterss	March 22, 2012 04:44 by daxterss	0	517
equipment for instance willmark42	March 20, 2012 11:49 by willmark42	0	317
night golf willmark42	March 20, 2012 11:48 by willmark42	0	397
autoblade nataly	March 2, 2012 13:52 by Hamidzoka	4	835
an error in fine bluelotus	March 2, 2012 06:50 by bluelotus	0	466
Underrelaxation factor Attesz	February 8, 2012 08:39 by Attesz	0	530
Inaccurate turbulent viscosity profile in case of flat plate Attesz	February 3, 2012 04:03 by Attesz	0	608
mesh spacing jinpeng19861213	January 14, 2012 19:31 by oldshoes81	5	865
visualize pressure using cfview kecilcupu	January 13, 2012 21:49 by oldshoes81	3	754
Throughflow Model in NUMECA sstemptation	December 8, 2011 05:36 by sstemptation	1	729
some problem about Design3D totti9090212	December 4, 2011 07:14 by shahed.malekipour	2	716

Page 2 of 10

Last »

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 20:11.