|
[Sponsors] |
Bugs in I found two bugs in turbulentTemperatureRadCoupledMixed boundary |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 11, 2014, 12:46 |
Bugs in I found two bugs in turbulentTemperatureRadCoupledMixed boundary
|
#1 |
Senior Member
Fabian Roesler
Join Date: Mar 2009
Location: Germany
Posts: 213
Rep Power: 18 |
Hi Folks,
I found two bugs in turbulentTemperatureRadCoupledMixed boundary in OpenFOAM 2.3.x. First: When using several layers to describe a resistance, the transmissivity is calculated the wrong way. Second: When using two or more ami interfaces per region, the kappa vector is initialized with the old size of the other ami of the region and thus, the solver says that the two ami patches (source and target) have inconsistent size. I reported the bugs with a test case and the fixed turbulentTemperatureRadCoupledMixed boundary.C here: http://www.openfoam.org/mantisbt/vie...=1440#bugnotes |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Low Mixing time Problem | Mavier | CFX | 5 | April 29, 2013 01:00 |
critical error during installation of openfoam | Fabio88 | OpenFOAM Installation | 21 | June 2, 2010 04:01 |
OpenFOAM15 paraFoam bug | koen | OpenFOAM Bugs | 19 | June 30, 2009 11:46 |
Installation OF1.5-dev | ttdtud | OpenFOAM Installation | 46 | May 5, 2009 03:32 |
OpenFOAM15 installables are incomplete problem with paraFoam | tryingof | OpenFOAM Bugs | 17 | December 7, 2008 05:41 |