CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Bugs (http://www.cfd-online.com/Forums/openfoam-bugs/)
-   -   ParaView display problem (http://www.cfd-online.com/Forums/openfoam-bugs/62292-paraview-display-problem.html)

holzmichel March 10, 2009 11:06

Hello all, I installed OF-1
 
Hello all,

I installed OF-1.5 and compiled everything.
Here is my prob:

I wanted to try the cavity-test like the manual of OF-1.5.
When paraView has started nothing is shown in the display window still i push my left mouse button. when i press it the figure would displayed for max 1 second. what is the reason? how could i correct it that i see the figure in the display-window all the time?

regards

Michel

mahaputra March 10, 2009 16:51

did you check your qt version
 
did you check your qt version ? gmp and mpfr ?

prapanj March 11, 2009 00:04

Hi Michel, are you using Ubunt
 
Hi Michel, are you using Ubuntu Intrepid? I had the same problem. Set your visual effects to "none" in the appearance preference. It is some graphical display issue.

holzmichel March 11, 2009 02:57

Thousend thanks. I set the vis
 
Thousend thanks. I set the visual effects to "none" and now it works perfect.

Michel

prapanj March 11, 2009 04:20

No problem. And if you ever co
 
No problem. And if you ever consider recompiling paraView, make sure you get the older version of Qt( which I was never able to find).

http://www.cfd-online.com/OpenFOAM_D...part/happy.gif

prapanj March 11, 2009 04:37

No problem. And if you ever co
 
No problem. And if you ever consider recompiling paraView, make sure you get the older version of Qt( which I was never able to find).

http://www.cfd-online.com/OpenFOAM_D...part/happy.gif

holzmichel March 11, 2009 05:54

I use qt4.3.4 like in the manu
 
I use qt4.3.4 like in the manual
which one do you use?

tino_boelke April 27, 2009 18:42

Hi, im having a problem like holzmichel. After starting paraFoam and clicking the Apply-button, the model doesnt appear (tested this for different tutorials). In the Information-tab is shows that the is imported (for icoFoam/cavity: unstructured grid, 400 cells 882 points). Using foamToVTK works, so i think its a Problem in displaying the Foam files!?
Also turned visual effucts in appearance off.

Im using Ubuntu 9.04, actual OpenFoam-1.5-dev and running ParaView-3.4.0 with Qt-4.3.5. On Ubuntu 8.10 everything worked fine with the same config.

Anyone suggestions?


All times are GMT -4. The time now is 11:19.