CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Bugs (http://www.cfd-online.com/Forums/openfoam-bugs/)
-   -   ParaView Segmentation fault (http://www.cfd-online.com/Forums/openfoam-bugs/62380-paraview-segmentation-fault.html)

zzli November 14, 2008 01:40

Dear All, When I run parav
 
Dear All,

When I run paraview, it crashes with segmentation fault. Below are the trace results:



Anybody can help? Thank you.

mattijs November 14, 2008 04:53

I cannot see a trace or attach
 
I cannot see a trace or attachment. Does the trace show a problem in any of the OpenFOAM reader (the vtkPV3Foam class or the PV3FoamReader class)? If not it might be a generic paraview problem.

zzli November 14, 2008 05:10

Please look at the third post
 
Please look at the third post on this topic. Something wrong when I attached the trace results, I finally had to seperate it into three parts. Thanks.

zzli November 14, 2008 07:07

The problem has been solved by
 
The problem has been solved by:
remove qt 4.3.2
install libq4-dev
recompile PV3FoamReader


All times are GMT -4. The time now is 18:43.