CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Bugs (http://www.cfd-online.com/Forums/openfoam-bugs/)
-   -   Sample has problems with baffles propably problem with particletrackToFace (http://www.cfd-online.com/Forums/openfoam-bugs/62535-sample-has-problems-baffles-propably-problem-particletracktoface.html)

mattijs October 19, 2007 14:07

Looked at time 0.0032208 of mi
 
Looked at time 0.0032208 of mixer2D. Time 0 consists of 2 separate disconnected regions so didn't use that one.

When compared to the cell pressure in Paraview looks plausible.

http://www.cfd-online.com/OpenFOAM_D...s/126/5738.png
http://www.cfd-online.com/OpenFOAM_D...s/126/5739.png

gschaider October 22, 2007 09:20

My description above was for t
 
My description above was for t=0. To be honest: I didn't look at the later timesteps, because I was using the mesh only as an example for a blockMesh-generated mesh where this occurs. The sample for t=0 looks like this:

http://www.cfd-online.com/OpenFOAM_D...s/126/5756.png

(that's what i described in my original posting)


All times are GMT -4. The time now is 05:36.