CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Bugs (http://www.cfd-online.com/Forums/openfoam-bugs/)
-   -   ReconstructPar (http://www.cfd-online.com/Forums/openfoam-bugs/62557-reconstructpar.html)

maka August 19, 2007 16:50

reconstructPar does not copy n
 
reconstructPar does not copy nAveragingSteps.raw from processor0 to the reconstructed directory. As a result rerunning a case from a reconstructed field, will start averaging from the last time step and all the averaged history will be lost.

A bad solution is to copy that file by hand from every processor0/timedirectory to the reconstructed field . I post this as a bug because, it is hard to spot.

Best regards,
Maka

henry August 19, 2007 16:54

Which version of OpenFOAM are
 
Which version of OpenFOAM are you running?

maka August 19, 2007 17:02

V 1.3. The above is also true
 
V 1.3. The above is also true when you use decomposePar with startTime pointing to a time directory that has nAveragingStep.raw. The file will not be copied to processor0.

Best regards,
Maka.

henry August 19, 2007 17:03

We have fixed this problem in
 
We have fixed this problem in version 1.4.1.

maka August 19, 2007 17:04

Thanks Henry.
 
Thanks Henry.

msrinath80 August 21, 2007 18:30

It seems to be fixed in 1.4 as
 
It seems to be fixed in 1.4 as well.

maka August 22, 2007 04:23

Thanks Srinath.
 
Thanks Srinath.


All times are GMT -4. The time now is 01:39.