Latest git 1.6.x : cellDistFuncs.H

podallaire · September 15, 2009, 17:25

Hi,

just want to report some missing links when compiling the latest git / can see this error many times :

OpenFOAM/OpenFOAM-1.6.x/src/meshTools/lnInclude/cellDistFuncs.H:166:39: error: cellDistFuncsTemplates.C: No such file or directory

Thanks

PO

mattijs · September 15, 2009, 18:13

It's a new file and hasn't been linked to the lnInclude directory. Just remove the lnInclude directory in the meshTools directory and 'wmake libso' (or Allwmake from the top level)

mcarpe · December 11, 2009, 06:42

Hello,
thanks for the hint on the previous post. It solved the issue, then.
Now I'm getting similar errors with the latest git version of 1.6.x.

In particular, this is the error that keeps popping up during the compilation:

lnInclude/stringListOps.H:43:31: error: wordReListMatcher.H: No such file or directory

...and many others, always related to this wordReListMatcher.H file.

Any thought?

thanks

mattijs · December 11, 2009, 07:24

This file (is new) is not in your lnInclude directory. Clear out your lnInclude directory so as to force a rebuild of it. wcleanLnInclude can be used to clear the lnInclude directory.

mcarpe · December 11, 2009, 08:03

Yep! It worked.

Thanks a lot.

There was another compilation error, though:

make[3]: *** No rule to make target `curevedEdgeList.H', needed by `blockMeshApp.dep'.

I solved that issue just entering into the 'blockMesh' source directory, 'wclean' and then building it again with 'wmake'.

September 15, 2009, 17:25	Latest git 1.6.x : cellDistFuncs.H	#1
podallaire Senior Member Pierre-Olivier Dallaire Join Date: Mar 2009 Location: Montreal, Quebec, Canada Posts: 192 Rep Power: 17	Hi, just want to report some missing links when compiling the latest git / can see this error many times : OpenFOAM/OpenFOAM-1.6.x/src/meshTools/lnInclude/cellDistFuncs.H:166:39: error: cellDistFuncsTemplates.C: No such file or directory Thanks PO

December 11, 2009, 06:42	similar problem...	#3
mcarpe New Member Matteo Carpentieri Join Date: Mar 2009 Posts: 28 Rep Power: 17	Hello, thanks for the hint on the previous post. It solved the issue, then. Now I'm getting similar errors with the latest git version of 1.6.x. In particular, this is the error that keeps popping up during the compilation: lnInclude/stringListOps.H:43:31: error: wordReListMatcher.H: No such file or directory ...and many others, always related to this wordReListMatcher.H file. Any thought? thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
git problem with http repository	az_monger	OpenFOAM Bugs	2	September 4, 2009 05:45
Question about obtaining the latest version	rauld	OpenFOAM Bugs	10	August 25, 2009 10:26
git svn clone of openfoam-extend	Bost	OpenFOAM	12	August 3, 2009 20:16
Installation Problem with GIT	sega	OpenFOAM Installation	2	May 8, 2009 08:46
OpenFOAM Patched Version 1.5 via git Repository	OpenFOAM discussion board administrator	OpenFOAM Announcements from ESI-OpenCFD	0	August 26, 2008 05:06

September 15, 2009, 18:13		#2
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	It's a new file and hasn't been linked to the lnInclude directory. Just remove the lnInclude directory in the meshTools directory and 'wmake libso' (or Allwmake from the top level)

December 11, 2009, 07:24		#4
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	This file (is new) is not in your lnInclude directory. Clear out your lnInclude directory so as to force a rebuild of it. wcleanLnInclude can be used to clear the lnInclude directory.

December 11, 2009, 08:03		#5
mcarpe New Member Matteo Carpentieri Join Date: Mar 2009 Posts: 28 Rep Power: 17	Yep! It worked. Thanks a lot. There was another compilation error, though: make[3]: *** No rule to make target `curevedEdgeList.H', needed by `blockMeshApp.dep'. I solved that issue just entering into the 'blockMesh' source directory, 'wclean' and then building it again with 'wmake'.