[OpenFOAM.org] install openfoam2.1.1 error on ubuntu10.10

liujmljm · June 12, 2012, 04:43

Hi, I install the openfoam2.1.1 on my laptop. The installing method is the one presented on the site of openfoam. But I encounter following erro. I do not know why. Can you help me. Thank you!
I../phaseModel/lnInclude -I../interfacialModels/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/frictionalStressModel.o
SOURCE=frictionalStressModel/frictionalStressModel/newFrictionalStressModel.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/foam/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I../phaseModel/lnInclude -I../interfacialModels/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/newFrictionalStressModel.o
SOURCE=frictionalStressModel/JohnsonJackson/JohnsonJacksonFrictionalStress.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/foam/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I../phaseModel/lnInclude -I../interfacialModels/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/JohnsonJacksonFrictionalStress.o
SOURCE=frictionalStressModel/Schaeffer/SchaefferFrictionalStress.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/foam/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I../phaseModel/lnInclude -I../interfacialModels/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/SchaefferFrictionalStress.o
'/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/lib/libkineticTheoryModel.so' is up to date.
make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam/kineticTheoryModels'
+ wmake
make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam'
make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam'
make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam'
SOURCE=twoPhaseEulerFoam.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I../bubbleFoam -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/transportModels/incompressible/lnInclude -IturbulenceModel -IkineticTheoryModels/lnInclude -IinterfacialModels/lnInclude -IphaseModel/lnInclude -Iaveraging -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/twoPhaseEulerFoam.o
/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude/readTimeControls.H: In function ‘int main(int, char**)’:
/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude/readTimeControls.H:38: warning: unused variable ‘maxDeltaT’
g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I../bubbleFoam -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/transportModels/incompressible/lnInclude -IturbulenceModel -IkineticTheoryModels/lnInclude -IinterfacialModels/lnInclude -IphaseModel/lnInclude -Iaveraging -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed Make/linuxGcc44DPOpt/twoPhaseEulerFoam.o -L/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/lib \
-lEulerianInterfacialModels -lfiniteVolume -lmeshTools -lincompressibleTransportModels -lphaseModel -lkineticTheoryModel -lOpenFOAM -ldl -lm -o /home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/twoPhaseEulerFoam
/usr/bin/ld: cannot find -lEulerianInterfacialModels
/usr/bin/ld: cannot find -lfiniteVolume
/usr/bin/ld: cannot find -lmeshTools
/usr/bin/ld: cannot find -lincompressibleTransportModels
/usr/bin/ld: cannot find -lphaseModel
collect2: ld returned 1 exit status
make[2]: *** [/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/twoPhaseEulerFoam] Error 1
make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam'
make[1]: *** [twoPhaseEulerFoam] Error 2
make[1]: Target `application' not remade because of errors.
make[1]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase'
make: *** [multiphase] Error 2
make[1]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis'
make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidDisplacementFoam'
make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidDisplacementFoam'
make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidDisplacementFoam'
SOURCE=tractionDisplacement/tractionDisplacementFvPatchVectorField.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacement/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/tractionDisplacementFvPatchVectorField.o
SOURCE=solidDisplacementFoam.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacement/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/solidDisplacementFoam.o
readSolidDisplacementFoamControls.H: In function ‘int main(int, char**)’:
readSolidDisplacementFoamControls.H:3: warning: unused variable ‘nCorr’
readSolidDisplacementFoamControls.H:5: warning: unused variable ‘convergenceTolerance’
g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacement/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed Make/linuxGcc44DPOpt/tractionDisplacementFvPatchVectorField.o Make/linuxGcc44DPOpt/solidDisplacementFoam.o -L/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/lib \
-lfiniteVolume -lOpenFOAM -ldl -lm -o /home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/solidDisplacementFoam
/usr/bin/ld: cannot find -lfiniteVolume
collect2: ld returned 1 exit status
make[2]: *** [/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/solidDisplacementFoam] Error 1
make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidDisplacementFoam'
make[1]: *** [solidDisplacementFoam] Error 2
make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam'
make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam'
make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam'
SOURCE=tractionDisplacementCorrection/tractionDisplacementCorrectionFvPatchVectorField.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacementCorrectionStress -I../solidDisplacementFoam -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/tractionDisplacementCorrectionFvPatchVectorField.o
SOURCE=solidEquilibriumDisplacementFoam.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacementCorrectionStress -I../solidDisplacementFoam -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/solidEquilibriumDisplacementFoam.o
g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacementCorrectionStress -I../solidDisplacementFoam -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed Make/linuxGcc44DPOpt/tractionDisplacementCorrectionFvPatchVectorField.o Make/linuxGcc44DPOpt/solidEquilibriumDisplacementFoam.o -L/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/lib \
-lfiniteVolume -lOpenFOAM -ldl -lm -o /home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/solidEquilibriumDisplacementFoam
/usr/bin/ld: cannot find -lfiniteVolume
collect2: ld returned 1 exit status
make[2]: *** [/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/solidEquilibriumDisplacementFoam] Error 1
make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam'
make[1]: *** [solidEquilibriumDisplacementFoam] Error 2
make[1]: Target `application' not remade because of errors.
make[1]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis'
make: *** [stressAnalysis] Error 2
make: Target `application' not remade because of errors.

wyldckat · June 12, 2012, 17:24

Greetings Jianming Liu,

OK, the first error is usually the one to blame. This is too much far ahead for deducing how to fix this.

Run Allwmake like this:

Code:

./Allwmake > make.log 2>&1

When it's finishes, edit the file "make.log" and search for the first occurrence of "Error ". There should lie the real problem.

If you still can't figure out the problem, search and replace any sensitive content in the file (names and paths), then pack the file and attach the packaged file.
To pack the file, you can run:

Code:

tar -czf make.log.tar.gz make.log

Then attach the file "make.log.tar.gz" to your next post.

Best regards,
Bruno

liujmljm · June 13, 2012, 13:05

Thank you. I have done by your saying and found the error and fix it. Thank you

Quote:

Originally Posted by wyldckat

Greetings Jianming Liu,

OK, the first error is usually the one to blame. This is too much far ahead for deducing how to fix this.

Run Allwmake like this:

Code:

./Allwmake > make.log 2>&1

When it's finishes, edit the file "make.log" and search for the first occurrence of "Error ". There should lie the real problem.

If you still can't figure out the problem, search and replace any sensitive content in the file (names and paths), then pack the file and attach the packaged file.
To pack the file, you can run:

Code:

tar -czf make.log.tar.gz make.log

Then attach the file "make.log.tar.gz" to your next post.

Best regards,
Bruno

sabrinacarson · December 12, 2019, 23:29

Hello Jianming Liu

Can you please tell me how did you solve the error?

June 12, 2012, 04:43	install openfoam2.1.1 error on ubuntu10.10	#1
liujmljm Member Jianming Liu Join Date: Mar 2009 Location: China Posts: 71 Rep Power: 17	Hi, I install the openfoam2.1.1 on my laptop. The installing method is the one presented on the site of openfoam. But I encounter following erro. I do not know why. Can you help me. Thank you! I../phaseModel/lnInclude -I../interfacialModels/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/frictionalStressModel.o SOURCE=frictionalStressModel/frictionalStressModel/newFrictionalStressModel.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/foam/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I../phaseModel/lnInclude -I../interfacialModels/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/newFrictionalStressModel.o SOURCE=frictionalStressModel/JohnsonJackson/JohnsonJacksonFrictionalStress.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/foam/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I../phaseModel/lnInclude -I../interfacialModels/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/JohnsonJacksonFrictionalStress.o SOURCE=frictionalStressModel/Schaeffer/SchaefferFrictionalStress.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/foam/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I../phaseModel/lnInclude -I../interfacialModels/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/SchaefferFrictionalStress.o '/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/lib/libkineticTheoryModel.so' is up to date. make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam/kineticTheoryModels' + wmake make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam' make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam' make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam' SOURCE=twoPhaseEulerFoam.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I../bubbleFoam -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/transportModels/incompressible/lnInclude -IturbulenceModel -IkineticTheoryModels/lnInclude -IinterfacialModels/lnInclude -IphaseModel/lnInclude -Iaveraging -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/twoPhaseEulerFoam.o /home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude/readTimeControls.H: In function ‘int main(int, char)’: /home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude/readTimeControls.H:38: warning: unused variable ‘maxDeltaT’ g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I../bubbleFoam -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/transportModels/incompressible/lnInclude -IturbulenceModel -IkineticTheoryModels/lnInclude -IinterfacialModels/lnInclude -IphaseModel/lnInclude -Iaveraging -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed Make/linuxGcc44DPOpt/twoPhaseEulerFoam.o -L/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/lib \ -lEulerianInterfacialModels -lfiniteVolume -lmeshTools -lincompressibleTransportModels -lphaseModel -lkineticTheoryModel -lOpenFOAM -ldl -lm -o /home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/twoPhaseEulerFoam /usr/bin/ld: cannot find -lEulerianInterfacialModels /usr/bin/ld: cannot find -lfiniteVolume /usr/bin/ld: cannot find -lmeshTools /usr/bin/ld: cannot find -lincompressibleTransportModels /usr/bin/ld: cannot find -lphaseModel collect2: ld returned 1 exit status make[2]: * [/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/twoPhaseEulerFoam] Error 1 make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase/twoPhaseEulerFoam' make[1]: * [twoPhaseEulerFoam] Error 2 make[1]: Target `application' not remade because of errors. make[1]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/multiphase' make: * [multiphase] Error 2 make[1]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis' make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidDisplacementFoam' make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidDisplacementFoam' make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidDisplacementFoam' SOURCE=tractionDisplacement/tractionDisplacementFvPatchVectorField.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacement/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/tractionDisplacementFvPatchVectorField.o SOURCE=solidDisplacementFoam.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacement/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/solidDisplacementFoam.o readSolidDisplacementFoamControls.H: In function ‘int main(int, char)’: readSolidDisplacementFoamControls.H:3: warning: unused variable ‘nCorr’ readSolidDisplacementFoamControls.H:5: warning: unused variable ‘convergenceTolerance’ g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacement/lnInclude -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed Make/linuxGcc44DPOpt/tractionDisplacementFvPatchVectorField.o Make/linuxGcc44DPOpt/solidDisplacementFoam.o -L/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/lib \ -lfiniteVolume -lOpenFOAM -ldl -lm -o /home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/solidDisplacementFoam /usr/bin/ld: cannot find -lfiniteVolume collect2: ld returned 1 exit status make[2]: * [/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/solidDisplacementFoam] Error 1 make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidDisplacementFoam' make[1]: * [solidDisplacementFoam] Error 2 make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam' make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam' make[2]: Entering directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam' SOURCE=tractionDisplacementCorrection/tractionDisplacementCorrectionFvPatchVectorField.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacementCorrectionStress -I../solidDisplacementFoam -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/tractionDisplacementCorrectionFvPatchVectorField.o SOURCE=solidEquilibriumDisplacementFoam.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacementCorrectionStress -I../solidDisplacementFoam -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGcc44DPOpt/solidEquilibriumDisplacementFoam.o g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/finiteVolume/lnInclude -ItractionDisplacementCorrectionStress -I../solidDisplacementFoam -IlnInclude -I. -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude -I/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed Make/linuxGcc44DPOpt/tractionDisplacementCorrectionFvPatchVectorField.o Make/linuxGcc44DPOpt/solidEquilibriumDisplacementFoam.o -L/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/lib \ -lfiniteVolume -lOpenFOAM -ldl -lm -o /home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/solidEquilibriumDisplacementFoam /usr/bin/ld: cannot find -lfiniteVolume collect2: ld returned 1 exit status make[2]: * [/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/platforms/linuxGcc44DPOpt/bin/solidEquilibriumDisplacementFoam] Error 1 make[2]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis/solidEquilibriumDisplacementFoam' make[1]: * [solidEquilibriumDisplacementFoam] Error 2 make[1]: Target `application' not remade because of errors. make[1]: Leaving directory `/home/jmliu/OpenFOAM/OpenFOAM-2.1.1/applications/solvers/stressAnalysis' make: * [stressAnalysis] Error 2 make: Target `application' not remade because of errors.

June 12, 2012, 17:24		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Jianming Liu, OK, the first error is usually the one to blame. This is too much far ahead for deducing how to fix this. Run Allwmake like this: Code: ./Allwmake > make.log 2>&1 When it's finishes, edit the file "make.log" and search for the first occurrence of "Error ". There should lie the real problem. If you still can't figure out the problem, search and replace any sensitive content in the file (names and paths), then pack the file and attach the packaged file. To pack the file, you can run: Code: tar -czf make.log.tar.gz make.log Then attach the file "make.log.tar.gz" to your next post. Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM.org] Install OpenFOAM without admin right	OpenFoamlove	OpenFOAM Installation	1	December 31, 2017 11:45
error make SU2 4.0.1	Heathckliff	SU2 Installation	2	November 9, 2015 05:48
[swak4Foam] Install swak4Foam on OpenFOAM1.7.1 on Ubuntu 13.04	kobayashi	OpenFOAM Community Contributions	2	January 5, 2014 17:33
unable to install openfoam 1.7 using apt-get	maazhmd	OpenFOAM Installation	7	July 24, 2011 11:18
How to Install OpenFOAM on 64 Ubuntu 9.04	hansel	OpenFOAM Installation	62	March 19, 2010 14:43

December 12, 2019, 23:29		#4
sabrinacarson New Member Sabrina Carson Join Date: May 2018 Posts: 15 Rep Power: 7	Hello Jianming Liu Can you please tell me how did you solve the error?