CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (http://www.cfd-online.com/Forums/openfoam-installation/)
-   -   Problems with compile OpenFoam (http://www.cfd-online.com/Forums/openfoam-installation/104641-problems-compile-openfoam.html)

Black-Pearl July 12, 2012 04:47

Problems with compile OpenFoam
 
Hi CFD-Online-Users,

i have big problems with the installation of OpenFoam. I have read some topics about this but nothing could help me. Because I open a topic for me.

When ever I tried ./Allwmake after installation openfoam211 following this error:

./Allwmake: 4: ./Allwmake: wmakeCheckPwd: not found
Error: Current directory is not $WM_PROJECT_DIR
The environment variables are inconsistent with the installation.
Check the OpenFOAM entries in your dot-files and source them.

I have openfoam installed with using a virtual box on Windows 7.

Have anyone a solution to my problem????

Thanks

wyldckat July 12, 2012 05:50

Greetings Black-Pearl,

Which instructions are you following?

Best regards,
Bruno

Black-Pearl July 12, 2012 05:56

Hello Bruno,

i following the instructions from the openfoam-website (Ubuntu Deb Pack Installation).

wyldckat July 12, 2012 06:10

Quote:

Originally Posted by Black-Pearl (Post 371081)
i following the instructions from the openfoam-website (Ubuntu Deb Pack Installation).

You mean this page: http://www.openfoam.org/download/ubuntu.php - correct?

If so, then you don't need to run "Allwmake"! Simply follow the instructions on that page!
Switch to another page only if that page tells you to. ;)

Black-Pearl July 12, 2012 06:12

Yes. Exactly this link.
Did you mean that my installation is correct without Allwmake?
And its correct that Allwmake not run???

wyldckat July 12, 2012 06:57

Quote:

Originally Posted by Black-Pearl (Post 371084)
Yes. Exactly this link.
Did you mean that my installation is correct without Allwmake?
And its correct that Allwmake not run???

Like I wrote, simply follow the instructions on that page, because those instructions will install an already built version of OpenFOAM, ready to be used!
"Allwmake" is only part of the instructions for building from source.

Black-Pearl July 12, 2012 07:01

Super. You saved my day.
I tried to solve this "problem" about a long time :-)

Thank you very much!


All times are GMT -4. The time now is 14:57.