CFD Online Discussion Forums - [swak4Foam] Error installing swak4Foam

Page 2 of 10

Show 40 post(s) from this thread on one page

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Community Contributions (https://www.cfd-online.com/Forums/openfoam-community-contributions/)

- - [swak4Foam] Error installing swak4Foam (https://www.cfd-online.com/Forums/openfoam-community-contributions/113239-error-installing-swak4foam.html)

sharonyue

March 21, 2013 05:24

Quote:

Originally Posted by lohasz (Post 415013)

Sorry, the verison of swak4foam was given in the title :)

It was 0.2.3, I just downloaded from: http://openfoamwiki.net/images/c/c9/...e_0.2.3.tar.gz

Thanks,
Máté

I have download this and do the comment,
//#define FOAM_LOOKUPCLASS_NO_CONST
it compiles okay in my foam 2.2.0.
And run funkySetFields -time 0
It works!
Thanks you all you guys especially Gschaider.you did a splenedid work.!

Well, I tried to make the velocity of alpha 0 field to be (0 -0.1 0)

Code:

FoamFile

{

version 2.0;

format ascii;

class dictionary;

object funkySetFieldsDict;

}

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //



expressions

(

        internalFields 

        {

        field        alpha1;

        expression "1";    

        condition "pow(pos().x,2) + pow(pos().y-0.15,2) <= pow(0.15,2)/4";//f   x^2+(y-0.0015)^2<0.0015^2/4

        keepPatches        1;

        }

        

        internalFields 

        {

        field        U;

        expression "(0 -0.1 0)";

        condition "pow(pos().x,2) + pow(pos().y-0.15,2) <= pow(0.15,2)/4";//f   x^2+(y-0.0015)^2<0.0015^2/4

        keepPatches        1;

        }



);

ERROR:

Code:

Create time



Create mesh for time = 0





Time = 0

 Using funkySetFieldsDict 







Part: internalFields

 Modifying field alpha1 of type volScalarField



 Putting "1" into field alpha1 at t = "0" if condition "pow(pos().x,2) + pow(pos().y-0.15,2) <= pow(0.15,2)/4" is true

 Keeping patches unaltered



 Setting 284 of 8000 cells

 Writing to "alpha1"





Part: internalFields

 Modifying field U of type volVectorField



 Putting "(0 0 0)" into field U at t = "0" if condition "pow(pos().x,2) + pow(pos().y-0.15,2) <= pow(0.15,2)/4" is true







--> FOAM FATAL ERROR: 

 Parser Error for driver FieldValueExpressionDriver at "1.4" :"syntax error, unexpected number"

"(0 0 0)"

     ^

-----|



Context of the error:





- Driver constructed from scratch

  Evaluating expression "(0 0 0)"





    From function parsingValue

    in file lnInclude/CommonValueExpressionDriverI.H at line 1039.



FOAM exiting

Does anyone know how to handle this?
Thanks in advanvce.

wyldckat

March 24, 2013 12:16

Hi sharonyue,

Quote:

Originally Posted by sharonyue (Post 415456)

...
Well, I tried to make the velocity of alpha 0 field to be (0 -0.1 0)
...

I suggest you start a new thread detailing what you are trying to do and the error you're getting, because this thread seems to be dedicated to installation issues ;)

Best regards,
Bruno

gschaider

March 24, 2013 16:52

Quote:

Originally Posted by sharonyue (Post 415456)

Code:



 Putting "(0 0 0)" into field U at t = "0" if condition "pow(pos().x,2) + pow(pos().y-0.15,2) <= pow(0.15,2)/4" is true







--> FOAM FATAL ERROR: 

 Parser Error for driver FieldValueExpressionDriver at "1.4" :"syntax error, unexpected number"

"(0 0 0)"

     ^

-----|



Context of the error:





- Driver constructed from scratch

  Evaluating expression "(0 0 0)"





    From function parsingValue

    in file lnInclude/CommonValueExpressionDriverI.H at line 1039.



FOAM exiting

Does anyone know how to handle this?
Thanks in advanvce.

Yep. By an advance technique called RTFM (Read the fine manual): http://openfoamwiki.net/index.php/Co...ulsedPitzDaily

(vectors, for technical reasons, have a different syntax in swak)

Quote:

Originally Posted by wyldckat (Post 416035)

I suggest you start a new thread detailing what you are trying to do and the error you're getting, because this thread seems to be dedicated to installation issues ;)

Of course Bruno is right here: a new problem deserves a new thread

sharonyue

March 24, 2013 21:58

Quote:

Originally Posted by gschaider (Post 416086)

Yep. By an advance technique called RTFM (Read the fine manual): http://openfoamwiki.net/index.php/Co...ulsedPitzDaily

(vectors, for technical reasons, have a different syntax in swak)

Of course Bruno is right here: a new problem deserves a new thread

Okay,I am sorry for that,and Thanks very much.I will try it a afterdays~

anmartin

April 1, 2013 13:51

1 Attachment(s)

Hello,

First at all, I want to thanks you all you guys especially Gschaider.you did a splendid work.! and many tanks for your work in swak4foam.

I have update to latest version of OF (Version 2.2.0) and i have tried to install swak4foam as you mention
1º hg clone http://openfoam-extend.hg.sourceforg...tend/swak4Foam
2º hg update port 2.0.x

3º copy swakConfiguration.example to swakConfiguration
4º comment the line //#define FOAM_LOOKUPCLASS_NO_CONST
5º Compile with this result file (allwmakelog file)

But when i try to use an example that run perfect in previous version of OF 2.0+swak4foam, I obtain the following error:

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

--> FOAM FATAL ERROR:
Not implemented

From function simpleFunctionObject::movePoints
in file simpleFunctionObject/simpleFunctionObject.H at line 160.

FOAM aborting

#0 Foam::error::printStack(Foam::Ostream&) at ??:?
#1 Foam::error::abort() at ??:?
#2 Foam::functionObjectList::movePoints(Foam::polyMes h const&) at ??:?
#3 Foam::polyMesh::movePoints(Foam::Field<Foam::Vecto r<double> > const&) at ??:?
#4 Foam::fvMesh::movePoints(Foam::Field<Foam::Vector< double> > const&) at ??:?
#5 Foam::solidBodyMotionFvMesh::update() at ??:?
#6
at ??:?
#7 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#8
at ??:?
Abortado (`core' generado)

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
The controldic is:
libs (
//"libOpenFOAM.so" // keeps paraFoam happy
"libtwoPhaseInterfaceProperties.so"
"libinterfaceProperties.so"
"libsimpleSwakFunctionObjects.so"
"libswakFunctionObjects.so"
);
functions
{
liquid_Vol
{
type swakExpression;
valueType internalField;
accumulations (sum);
expression "alpha1*vol()";
//verbose true;
//autowrite true;
}
};

Does anyone know how to handle this?
Thanks in advance.

Angel,

gschaider

April 1, 2013 17:10

Quote:

Originally Posted by anmartin (Post 417645)

The missing information was with which solver you're doing this. Obviously one that does mesh movement.

I think the problem is my fault. The new API requires that the functionObjects have methods that say "Hey. I know how to behave during mesh-movement". I said "OK. Fair enough. But I'm not sure if all my function objects are really up to it. So I'll include a dummy implementation that will blow up. So I'll know I'll have to check". And then I forgot about it. That's why it blew up in YOUR face.

Quick fix: go to the file Libraries/simpleFunctionObjects/simpleFunctionObject/simpleFunctionObject.H
search for the line

Code:

notImplemented("simpleFunctionObject::updateMesh");

and rewrite it to

Code:

// notImplemented("simpleFunctionObject::updateMesh");

Also do that with the similar line below it. Recompile. Then it should work

Claudio87

May 7, 2013 06:31

swak4Foam installation

1 Attachment(s)

Dear Foamers,

I have similar problems with the installation of swak4Foam, with the last version.
I create a new post here
http://www.cfd-online.com/Forums/ope...tml#post425801
if you prefer, or answer directly in this one.

I attached the log of ./Allwmake

Thank you in advance for your help!

Best regards,
Claudio

gruenertee

July 21, 2013 14:07

swak4foam installation

1 Attachment(s)

Hi Foamers,

i failed to install Swak4Foam_release_0.2.3 on my system. I am using Openfoam 2.2.0 on Ubuntu 12.04 LTS; i installed bison 2.5 and flex 2.5.35 and i did ./Allwmake; i added my wmake.txt file.

Best regards,

gruenertee

wyldckat

July 21, 2013 14:14

Greetings gruenertee,

According to your description, it looks like you did not read the warning sign ;)

Quote:

Originally Posted by http://openfoamwiki.net/index.php/Contrib/swak4Foam#Downloading

Warning: seems like there is a crucial change in the API between 2.2.0 and 2.2.x which makes compilation on 2.2.0 fail. If you use that version you'll have to apply a change described in this forum post

In addition, the 0.2.4 version can be retrieved directly from the SVN, as instructed in the wiki page: http://openfoamwiki.net/index.php/Co...am#Downloading
If you do not know how or simply do not want to use SVN, then you can download the latest 0.2.4 from here: https://github.com/wyldckat/swak4foam/archive/OF22X.zip

Best regards,
Bruno

gruenertee

July 22, 2013 04:50

wyldckat, I am very grateful for your pointing out the swak4foam version 0.2.4 for Openfoam 2.2.0; The installation process was successfully working. :rolleyes:

mebinitap

July 23, 2013 04:04

Hi All,

I tried to install swak4foam from the link:
https://github.com/wyldckat/swak4foam/archive/OF22X.zip

However I got the following error:

I/opt/openfoam220/src/sampling/lnInclude -I/opt/openfoam220/src/meshTools/Libraries/swak4FoamParsers/lnInclude/ -IlnInclude -I. -I/opt/openfoam220/src/OpenFOAM/lnInclude -I/opt/openfoam220/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed -Xlinker --no-as-needed Make/linuxGccDPOpt/funkySetFields.o -L/opt/openfoam220/platforms/linuxGccDPOpt/lib \
-lfiniteVolume -lmeshTools -L/home/basu/OpenFOAM/basu-2.2.0/platforms/linuxGccDPOpt/lib -lswak4FoamParsers -lOpenFOAM -ldl -lm -o /home/basu/OpenFOAM/basu-2.2.0/platforms/linuxGccDPOpt/bin/funkySetFields
make[1]: Leaving directory `/home/basu/OpenFOAM/basu-2.2.0/Swak4Foam_2.x_release_0.2.3/Utilities/funkySetFields'
Making dependency list for source file replayTransientBC.C
make[1]: Entering directory `/home/basu/OpenFOAM/basu-2.2.0/Swak4Foam_2.x_release_0.2.3/Utilities/replayTransientBC'
SOURCE=replayTransientBC.C ; g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/opt/openfoam220/src/cfdTools/lnInclude -I/opt/openfoam220/src/cfdTools/general/lnInclude -I/opt/openfoam220/src/finiteVolume/lnInclude -I/opt/openfoam220/src/meshTools/lnInclude -IlnInclude -I. -I/opt/openfoam220/src/OpenFOAM/lnInclude -I/opt/openfoam220/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/replayTransientBC.o
g++ -m32 -Dlinux -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-100 -I/opt/openfoam220/src/cfdTools/lnInclude -I/opt/openfoam220/src/cfdTools/general/lnInclude -I/opt/openfoam220/src/finiteVolume/lnInclude -I/opt/openfoam220/src/meshTools/lnInclude -IlnInclude -I. -I/opt/openfoam220/src/OpenFOAM/lnInclude -I/opt/openfoam220/src/OSspecific/POSIX/lnInclude -fPIC -Xlinker --add-needed -Xlinker --no-as-needed Make/linuxGccDPOpt/replayTransientBC.o -L/opt/openfoam220/platforms/linuxGccDPOpt/lib \
-lfiniteVolume -lmeshTools -lOpenFOAM -ldl -lm -o /home/basu/OpenFOAM/basu-2.2.0/platforms/linuxGccDPOpt/bin/replayTransientBC
make[1]: Leaving directory `/home/basu/OpenFOAM/basu-2.2.0/Swak4Foam_2.x_release_0.2.3/Utilities/replayTransientBC'

If you want to use swakCoded-function object or compile software based on swak set the environment variable SWAK4FOAM_SRC to /home/basu/OpenFOAM/basu-2.2.0/Swak4Foam_2.x_release_0.2.3/Libraries (most people will be fine without setting that variable)

It would be great if anybody can provide some help..

(I am using FOAM 2.2.0, Bison 2.5, Flex 2.5.35)

gschaider

July 23, 2013 04:40

Quote:

Originally Posted by mebinitap (Post 441382)

Hi All,

I tried to install swak4foam from the link:
https://github.com/wyldckat/swak4foam/archive/OF22X.zip

However I got the following error:

Code:

If you want to use swakCoded-function object or compile software based on swak set the environment variable SWAK4FOAM_SRC to /home/basu/OpenFOAM/basu-2.2.0/Swak4Foam_2.x_release_0.2.3/Libraries (most people will be fine without setting that variable)

It would be great if anybody can provide some help..

(I am using FOAM 2.2.0, Bison 2.5, Flex 2.5.35)

You mean that? If it was an error there would be something like "error", "abort", "failure", "fatal incident", "death from above" in the output not "most people will be fine". This is just a reminder (not even a warning) for people who want to write programs based on swak. For the the time being consider yourself to be in the "most people" category.

The rest of the output looks fine. If you want to be sure rerun Allwmake. You should only see a the lines about the libraries being created and the above message

mebinitap

July 23, 2013 07:02

Ok .. got it.. Thanx

franzi_

July 29, 2013 12:24

Compilation error

1 Attachment(s)

Hey! I tried to compile swak4foam but get a lot of errors. Tried the commenting in swak.H but did not work. Any other suggestions? I use OpenFoam2.2.x and swak4foam0.2.3!

I included a part here and attached the whole error message as word.
Hope somebody can help. Thanks a lot in advance!

Errormessage:

Quote:

bison: /disk1/users/fpfender/OpenFOAM/ThirdParty-2.2.x/platforms/linux64/bison-2.7/share/bison/m4sugar/m4sugar.m4: cannot open: No such file or directory
mv: cannot stat `*.tab.cc': No such file or directory
sed: can't read location.hh: No such file or directory
mv: cannot stat `location.hh': No such file or directory
mv: cannot stat `stack.hh': No such file or directory
mv: cannot stat `position.hh': No such file or directory
sed: can't read PatchValueExpressionParser.tab.hh: No such file or directory
mv: cannot stat `*.hh': No such file or directory
g++: error: Make/linux64Gcc46DPOpt/PatchValueExpressionParser.C: No such file or directory
g++: fatal error: no input files
compilation terminated.
make: *** [Make/linux64Gcc46DPOpt/PatchValueExpressionParser.o] Error 1
make: *** Waiting for unfinished jobs....
bison: /disk1/users/fpfender/OpenFOAM/ThirdParty-2.2.x/platforms/linux64/bison-2.7/share/bison/m4sugar/m4sugar.m4: cannot open: No such file or directory
mv: cannot stat `*.tab.cc': No such file or directory
sed: can't read location.hh: No such file or directory
mv: cannot stat `location.hh': No such file or directory
mv: cannot stat `stack.hh': No such file or directory
mv: cannot stat `position.hh': No such file or directory
sed: can't read SubsetValueExpressionParser.tab.hh: No such file or directory
mv: cannot stat `*.hh': No such file or directory
g++: error: Make/linux64Gcc46DPOpt/SubsetValueExpressionParser.C: No such file or directory
g++: fatal error: no input files
compilation terminated.
make: *** [Make/linux64Gcc46DPOpt/SubsetValueExpressionParser.o] Error 1
ExpressionResult/ExpressionResult.C: In member function 'void Foam::ExpressionResult::uglyDelete()':
ExpressionResult/ExpressionResult.C:216:20: warning: deleting 'void*' is undefined [enabled by default]
bison: /disk1/users/fpfender/OpenFOAM/ThirdParty-2.2.x/platforms/linux64/bison-2.7/share/bison/m4sugar/m4sugar.m4: cannot open: No such file or directory
mv: cannot stat `*.tab.cc': No such file or directory
sed: can't read location.hh: No such file or directory
mv: cannot stat `location.hh': No such file or directory
mv: cannot stat `stack.hh': No such file or directory
mv: cannot stat `position.hh': No such file or directory
sed: can't read FieldValueExpressionParser.tab.hh: No such file or directory
mv: cannot stat `*.hh': No such file or directory
g++: error: Make/linux64Gcc46DPOpt/FieldValueExpressionParser.C: No such file or directory
g++: fatal error: no input files
compilation terminated.
make: *** [Make/linux64Gcc46DPOpt/FieldValueExpressionParser.o] Error 1
Parser library did not compile OK. No sense continuing as everything else depends on it
Requirements for Library not satisfied. I see no sense in going on

gschaider

July 29, 2013 13:26

Quote:

Originally Posted by franzi_ (Post 442629)

At first: Use CODE instead of QUOTE for output. That way one can easily quote your error messages.

Anyway: the error message says that there is a installation problem with the bison-version in your ThirdParty-tools (did you add this bison yourself or does it come with the prepackaged ThirdParty-stuff?). Hard to tell what is actually the problem. I'd suggest to use the bison from the operating system

akidess

September 10, 2013 12:28

Just did a checkout via hg and bumped into the same issue. Is there a reason for keeping around that line?

Quote:

Originally Posted by gschaider (Post 408099)

The problem is a workaround for older versions of 1.6-ext that does not seem to be necessary anymore. In the file

Libraries/swak4FoamParsers/include/swak.H

comment out the line

Code:

#define FOAM_SYMMTENSOR_WORKAROUND

Code:

// #define FOAM_SYMMTENSOR_WORKAROUND

gschaider

September 10, 2013 17:55

Quote:

Originally Posted by akidess (Post 450964)

Just did a checkout via hg and bumped into the same issue. Is there a reason for keeping around that line?

Nostalgia and old installations. But you're right: should be commented out by default.

oort	September 12, 2013 16:03

Quote:

Originally Posted by gschaider (Post 415028)

Sorry. Overlooked it. The title is not included in the mails the system sends out (usually I read those, click on the link and start typing)

You have 2.2? (not 2.2.x - which I have). Seems there is a difference between the two. Could you try the following: edit Libraries/swak4FoamParsers/include/swak.H and comment out the line

#define FOAM_LOOKUPCLASS_NO_CONST

and retry. Thanks

Hi. What is suposed to change in this file?
I have comment it (with a //), I have maintained without change and never works. I have also patched with the swak2Foam_024_OF22x_49808a1c.gz file but the compilations always crashes...

Code:

...

../FieldValueExpressionParser.yy:5492:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5499:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5507:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5514:13: error: ‘yylloc’ was not declared in this scope

make: *** [Make/linux64GccDPOpt/FieldValueExpressionParser.o] Error 1

Parser library did not compile OK. No sense continuing as everything else depends on it

Requirements for Library not satisfied. I see no sense in going on

What should I do?

Thanks,
Carlos

gschaider

September 12, 2013 17:25

Quote:

Originally Posted by oort (Post 451403)

Hi. What is suposed to change in this file?
I have comment it (with a //), I have maintained without change and never works.

I don't quite get that sentence. You mean compilation doesn't work with or without that change? With the same error message?

Quote:

Originally Posted by oort (Post 451403)

I have also patched with the swak2Foam_024_OF22x_49808a1c.gz file but the compilations always crashes...

Code:

...

../FieldValueExpressionParser.yy:5492:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5499:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5507:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5514:13: error: ‘yylloc’ was not declared in this scope

make: *** [Make/linux64GccDPOpt/FieldValueExpressionParser.o] Error 1

Parser library did not compile OK. No sense continuing as everything else depends on it

Requirements for Library not satisfied. I see no sense in going on

What should I do?

That error is a problem in the code generated by bison. Which version of bison do you use? That information should be at the start of the compilation

fernando_fec

October 1, 2013 14:32

1 Attachment(s)

Quote:

Originally Posted by gschaider (Post 451418)

Quote:

Originally Posted by oort (Post 451403)

I have also patched with the swak2Foam_024_OF22x_49808a1c.gz file but the compilations always crashes...

Code:

...

../FieldValueExpressionParser.yy:5492:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5499:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5507:13: error: ‘yylloc’ was not declared in this scope

../FieldValueExpressionParser.yy:5514:13: error: ‘yylloc’ was not declared in this scope

make: *** [Make/linux64GccDPOpt/FieldValueExpressionParser.o] Error 1

Parser library did not compile OK. No sense continuing as everything else depends on it

Requirements for Library not satisfied. I see no sense in going on

What should I do?

Thanks,
Carlos

That error is a problem in the code generated by bison. Which version of bison do you use? That information should be at the start of the compilation

I have the same problem, or similar at least, and I'm using bison 3.0 (the only one available in the repos of ArchLinux) The full error log is attached in the .zip

I'm using the version cloned from the wiki's SVN, patched and with the line mentioned on the above post commented out, and I've tried it with OpenFOAM 2.2.1 and 2.2.x
I've also tried the developement version, with no luck

Code:

No 'swakConfiguration'. Python etc won't work

Checking swak4Foam-version and generating file

  File "./maintainanceScripts/makeSwakVersionFile.py", line 27

    print "Keeping the last real version number",verstring

                                               ^

SyntaxError: invalid syntax

Bison is version 3.0

Flex is version 2.5.37 (Minor version: 37)

OpenFOAM-version: Major 2 Minor 2 Patch 1 (-1 == x)

No swak4FoamParsers/foamVersion4swak.H. Generated

wmakeLnInclude: linking include files to ./lnInclude

 

(...)

                                                                                                                                         

../FieldValueExpressionParser.yy:5499:13: nota: in expansion of macro ‘sameSize’

lnInclude/swakChecks.H:63:92: error: ‘yylloc’ no se declaró en este ámbito

 #define sameSize(a,b) {Foam::string err=Foam::swakAssertSameSize(a,b); if(err!="") { error(yylloc,err); YYERROR; }}

                                                                                            ^

../FieldValueExpressionParser.yy:5507:13: nota: in expansion of macro ‘sameSize’

lnInclude/swakChecks.H:63:92: error: ‘yylloc’ no se declaró en este ámbito

 #define sameSize(a,b) {Foam::string err=Foam::swakAssertSameSize(a,b); if(err!="") { error(yylloc,err); YYERROR; }}

                                                                                            ^

../FieldValueExpressionParser.yy:5514:13: nota: in expansion of macro ‘sameSize’

make: *** [Make/linux64GccDPOpt/FieldValueExpressionParser.o] Error 1

Parser library did not compile OK. No sense continuing as everything else depends on it

Requirements for Library not satisfied. I see no sense in going on

All times are GMT -4. The time now is 07:41.

Page 2 of 10

Last »

Show 40 post(s) from this thread on one page