CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Installation

OF-1.6-ext: compiling fails on ubuntu 12.10

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 22, 2013, 03:20
Unhappy OF-1.6-ext: compiling fails on ubuntu 12.10
  #1
Member
 
Andreas Wendy
Join Date: Aug 2012
Posts: 73
Rep Power: 4
A.Wendy is on a distinguished road
Hi everybody,

I have several problems while compiling OF 1.6 ext on ubuntu 12.10. My computer crashed so I tried to install openFOAM 1.6 extend on a new PC.

I followed this instruction: http://repo.or.cz/w/OpenFOAM-1.6-ext....04_32-bit.txt

due to the problem with Ansys a changed the git source to git://repo.or.cz/OpenFOAM-1.6-ext.git

I had to change at the third-party tools the source libccmio-2.6.1.tar.gz because the original source went offline.

compiling stage 1 and 3 went fine but i am not able to compile stage 4.

Running the allmake script for OF 1.6 ext fails too.

Has anyone of you compiled OF 1.6 extend on ubuntu 12.10 64bit?

I added the log files below:
http://ubuntuone.com/2dVvHRQ1cGz8i6SyNujHI6



best wishes

Andy
A.Wendy is offline   Reply With Quote

Old   March 22, 2013, 07:47
Default
  #2
Member
 
Andreas Wendy
Join Date: Aug 2012
Posts: 73
Rep Power: 4
A.Wendy is on a distinguished road
hi everybody,

i managed to made it run. instead of ubuntu 12.10 i was using ubuntu 12.04 and using the manual from here:

http://repo.or.cz/w/OpenFOAM-1.6-ext....04_64-bit.txt


as the git source i used: git clone git://repo.or.cz/OpenFOAM-1.6-ext.git


for the thirdparty tools i changed the AllMake.stage3 to for "ibccmio-2.6.1.tar.gz" cause the source went offline:

the new source is: ftp://priede.bf.lu.lv/pub/TIS/biblio...o-2.6.1.tar.gz

wish you all fun
A.Wendy is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing OpenFOAM 2.1.1 and ParaView 3.12.0 on Ubuntu 12.10 wyldckat OpenFOAM Installation 14 February 12, 2013 05:43
Ubuntu 12.10 64bit: To compile or not? CrazyFatDude OpenFOAM Installation 2 January 14, 2013 05:18
difference in 'make axial mesh' for OF 2.1 & OF 1.6 EXT Rocky4 OpenFOAM Mesh Utilities 0 November 17, 2012 17:48
Solver Compiling error - OF 1.6 ext. raditz OpenFOAM Programming & Development 8 November 4, 2012 10:53
Installing OpenFOAM 1.6 on ubuntu 9.10 nabeels OpenFOAM Installation 32 May 10, 2010 03:09


All times are GMT -4. The time now is 12:32.