CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (https://www.cfd-online.com/Forums/openfoam-installation/)
-   -   Ubuntu 12.10 + openfoam2.2.0 ==> paraview error message (https://www.cfd-online.com/Forums/openfoam-installation/116282-ubuntu-12-10-openfoam2-2-0-paraview-error-message.html)

peteryuan April 16, 2013 10:15
Ubuntu 12.10 + openfoam2.2.0 ==> paraview error message
 
Hey guys,

I have searched and read a lot about this problem. But somehow I still dont get a clue how to fix is.
I followed the standard installation on http://www.openfoam.org/download/ubuntu.php
and removed also my old 2.1.1 version.
I have ubuntu 12.10 and openfoam 2.2.0
Everything seems to work fine now, only paraview always give me these error message:

a) when I just open paraview the programm alone, it shows me this


void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Stream Tracer" under id 120
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Calculator" under id 122
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Annotate Time Filter" under id 156
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Calculator" under id 122
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Clip" under id 124
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Contingency Statistics" under id 150
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Contour" under id 123
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Descriptive Statistics" under id 151
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Extract Level" under id 131
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Extract Selection" under id 135
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Extract Subset" under id 127
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "FOF/SOD Halo Finder" under id 133
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Glyph" under id 128
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Group Datasets" under id 130
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Histogram" under id 136
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Integrate Variables" under id 137
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Intersect Fragments" under id 147
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "K Means" under id 152
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Material Interface Filter" under id 148
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Multicorrelative Statistics" under id 153
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Particle Pathlines" under id 157
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "ParticleTracer" under id 158
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot Data" under id 138
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot Global Variables Over Time" under id 139
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot On Intersection Curves" under id 140
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot On Sorted Lines" under id 141
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot Over Line" under id 142
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot Selection Over Time" under id 143
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Principal Component Analysis" under id 154
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Probe Location" under id 144
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Programmable Filter" under id 145
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Slice" under id 125
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Stream Tracer" under id 120
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Cache" under id 159
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Interpolator" under id 160
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Shift Scale" under id 161
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Snap-to-Time-Step" under id 162
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Statistics" under id 163
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Threshold" under id 126
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Warp By Vector" under id 129

I fixed this with https://launchpad.net/~gladky-anton/+archive/paraview , and it worked for paraview. Yet when I type paraFoam, paraview is not able to be launched...
so I installed paraview again and removed the bug fix.

b) now when I use paraFoam, it shows me this:

void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Stream Tracer" under id 120
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Calculator" under id 122
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Annotate Time Filter" under id 156
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Calculator" under id 122
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Clip" under id 124
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Contingency Statistics" under id 150
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Contour" under id 123
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Descriptive Statistics" under id 151
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Extract Level" under id 131
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Extract Selection" under id 135
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Extract Subset" under id 127
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "FOF/SOD Halo Finder" under id 133
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Glyph" under id 128
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Group Datasets" under id 130
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Histogram" under id 136
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Integrate Variables" under id 137
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Intersect Fragments" under id 147
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "K Means" under id 152
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Material Interface Filter" under id 148
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Multicorrelative Statistics" under id 153
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Particle Pathlines" under id 157
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "ParticleTracer" under id 158
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot Data" under id 138
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot Global Variables Over Time" under id 139
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot On Intersection Curves" under id 140
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot On Sorted Lines" under id 141
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot Over Line" under id 142
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Plot Selection Over Time" under id 143
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Principal Component Analysis" under id 154
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Probe Location" under id 144
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Programmable Filter" under id 145
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Slice" under id 125
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Stream Tracer" under id 120
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Cache" under id 159
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Interpolator" under id 160
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Shift Scale" under id 161
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Snap-to-Time-Step" under id 162
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Temporal Statistics" under id 163
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Threshold" under id 126
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Warp By Vector" under id 129
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action


c) and if i click view button on menu, it shows me this:

void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Main Controls" under id 64
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Selection Controls" under id 65
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "VCR Controls" under id 66
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Current Time Controls" under id 67
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Active Variable Controls" under id 68
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Representation Toolbar" under id 69
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Camera Controls" under id 70
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Center Axes Controls" under id 71
void DBusMenuExporterPrivate::addAction(QAction*, int): Already tracking action "Macros Toolbars" under id 72


I would be glad if someone could help me with this.
Thanks a lot.

peter

wyldckat April 17, 2013 17:29
Hi Peter,
  1. Install again the fixed ParaView version you got from that other repository.
  2. Add an alias command to your "~/.bashrc" file:
    Code:
    alias paraFoam='paraFoam -builtin'
  3. Start a new terminal window and try running paraFoam from within your case folder.
Hopefully this will work as intended, by using the internal ".foam" reader that is built into ParaView.

Best regards,
Bruno

peteryuan April 18, 2013 13:19
Thanks Bruno
 
Everything worked out perfect. Thanks Bruno!
:D:D

tonylin July 21, 2013 18:19
similar error
 
Hi, Bruno:

currently, i encounter with a similar problem. I can open the paraview and run well using the cavity example. But when i am doing my own case, i convert mesh from star ccm to Foam and when i finish running the case well, the terminal said:
[31mQVariantMap DBusMenuExporterDBus::GetProperties(int, const QStringList&) [0m: Condition failed: action
[31mQVariantMap DBusMenuExporterDBus::GetProperties(int, const QStringList&) [0m: Condition failed: action
[31mQVariantMap DBusMenuExporterDBus::GetProperties(int, const QStringList&) [0m: Condition failed: action

And i can only choose solid color and vtkcompositelndex.

could u tell me what's the problem? maybe i convert the mesh wrong or?

Thank u very much

Tony

Quote:
Originally Posted by wyldckat (Post 421340)
Hi Peter,
  1. Install again the fixed ParaView version you got from that other repository.
  2. Add an alias command to your "~/.bashrc" file:
    Code:
    alias paraFoam='paraFoam -builtin'
  3. Start a new terminal window and try running paraFoam from within your case folder.
Hopefully this will work as intended, by using the internal ".foam" reader that is built into ParaView.

Best regards,
Bruno

wyldckat July 22, 2013 08:56
Greetings Tony and welcome to the forum!

  1. Which Linux Distribution are you using?
  2. Which ParaView version are you using?
  3. And did select in "Object Inspector" to load the fields you need?
  4. Did you simulate with OpenFOAM or just with Star-CCM+?
Best regards,
Bruno

tonylin July 22, 2013 10:20
Hi, Bruno:

Thank you for helping me.
1. ubuntu 12.10
2. paraview 3.12.0
3. I have select apply in object inspector and switch to display. In display, i can't choose P from the color panel.
4. I have finish simulate with openfoam.

Does this error mean my paraview version is not suitable, or the convertion has some problem cause i can do the tutorial with paraview well.

Best regards
Tony
Quote:
Originally Posted by wyldckat (Post 441250)
Greetings Tony and welcome to the forum!

  1. Which Linux Distribution are you using?
  2. Which ParaView version are you using?
  3. And did select in "Object Inspector" to load the fields you need?
  4. Did you simulate with OpenFOAM or just with Star-CCM+?
Best regards,
Bruno

wyldckat August 18, 2013 18:00
Hi Tony,

I've been very busy for the past few weeks. I don't know if you've managed to solve this problem or not.

If you haven't solved this problem yet, I suggest that you first follow the steps in the Tutorials chapter of the User Guide: http://www.openfoam.org/docs/user/tu...s.php#x4-30002
This way you can ensure if the problem is with your case or with ParaView.

Best regards,
Bruno


All times are GMT -4. The time now is 06:26.