CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (http://www.cfd-online.com/Forums/openfoam-installation/)
-   -   GGI missing in OF2.1.x installation? (http://www.cfd-online.com/Forums/openfoam-installation/118756-ggi-missing-of2-1-x-installation.html)

einatlev June 3, 2013 16:59

GGI missing in OF2.1.x installation?
 
Hello all
I am trying to add the solid mechanics solvers package to my current working installation of OF 2.1.x. I downloaded the solids package directly as a tgz file from a post by bigphil, since the GIT repo is down.
When I tried to build it, I got an error message saying that if couldn't find the ggiInterpolation.H file. However, I saw claims that GGI is supposed to be a part of OF2.1... What should I do?
All the best,
Einat

nimasam June 4, 2013 00:07

Dear einat :)

are you trying to add some features of OpenFOAM-extended to standard version of OpenFOAM?
because GGI is a feature in OpenFOAM extended and is not available at standard version, similar feature in standard version is AMI

einatlev June 4, 2013 00:48

Thank you nimasam.
1. In principle yes, the solid mechanics package is part of the Extend project. However, I saw an older post somewhere saying that the libraries needed for it, such as GGI, are now available in the standard version. Is this possible?

2. Where can I get the Extended version, since the sourceforge source is down, and all the mirror GIT servers listed on the Sticky-ed thread hung up or did not respond...
Thanks!

nimasam June 4, 2013 05:16

Quote:

Originally Posted by einatlev (Post 431794)
Thank you nimasam.
1. In principle yes, the solid mechanics package is part of the Extend project. However, I saw an older post somewhere saying that the libraries needed for it, such as GGI, are now available in the standard version. Is this possible?

Im not aware of that :), does this library need GGI at all?

Quote:

2. Where can I get the Extended version, since the sourceforge source is down, and all the mirror GIT servers listed on the Sticky-ed thread hung up or did not respond...
Thanks!
its totally in doubt :D, read this post

wyldckat June 9, 2013 16:41

Greetings to all!

@Einat: I saw just now something that might interest you: http://www.cfd-online.com/Forums/ope...tml#post432903 - post #69
Quote:

Originally Posted by bigphil (Post 432903)
I have recently compiled the solidMechanics code on OpenFOAM-2.2.0.

Best regards,
Bruno

einatlev June 10, 2013 10:14

Thanks wyldckat!


All times are GMT -4. The time now is 06:26.