CFD Online Discussion Forums - Ubuntu 13.04 - Allwmake

I think it could be of help to solve my problem if I post my bashrc file.
Maybe someone can help me eith that?
Code:
#----------------------------------*-sh-*--------------------------------------

# =========                 |

# \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox

#  \\    /   O peration     |

#   \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation

#    \\/     M anipulation  |

#------------------------------------------------------------------------------

# License

#     This file is part of OpenFOAM.

#

#     OpenFOAM is free software: you can redistribute it and/or modify it

#     under the terms of the GNU General Public License as published by

#     the Free Software Foundation, either version 3 of the License, or

#     (at your option) any later version.

#

#     OpenFOAM is distributed in the hope that it will be useful, but WITHOUT

#     ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

#     FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

#     for more details.

#

#     You should have received a copy of the GNU General Public License

#     along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.

#

# File

#     etc/bashrc

#

# Description

#     Startup file for OpenFOAM

#     Sourced from ~/.profile or ~/.bashrc

#     Should be usable by any POSIX-compliant shell (eg, ksh)

#

#------------------------------------------------------------------------------



export WM_PROJECT=OpenFOAM

export WM_PROJECT_VERSION=2.1.x



################################################################################

# USER EDITABLE PART: Changes made here may be lost with the next upgrade

#

# either set $FOAM_INST_DIR before sourcing this file or set

# 'foamInstall' below to where OpenFOAM is installed

#

# Location of the OpenFOAM installation

# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

foamInstall=$HOME/$WM_PROJECT

# foamInstall=~$WM_PROJECT

# foamInstall=/opt/$WM_PROJECT

# foamInstall=/usr/local/$WM_PROJECT

#

# END OF (NORMAL) USER EDITABLE PART

################################################################################



#

# These are the defaults for this version which should generally be

# overridden from the prefs.sh file or from command-line specification

#

#- note the location for later use (eg, in job scripts)

: ${FOAM_INST_DIR:=$foamInstall}; export FOAM_INST_DIR



#- Compiler location:

#    foamCompiler= system | ThirdParty (OpenFOAM)

foamCompiler=system



#- Compiler:

#    WM_COMPILER = Gcc | Gcc43 | Gcc44 | Gcc45 | Gcc46 | Clang | Icc (Intel icc)

export WM_COMPILER=Gcc

unset WM_COMPILER_ARCH WM_COMPILER_LIB_ARCH



#- Architecture:

#    WM_ARCH_OPTION = 32 | 64

export WM_ARCH_OPTION=64



#- Precision:

#    WM_PRECISION_OPTION = DP | SP

export WM_PRECISION_OPTION=DP



#- Optimised, debug, profiling:

#    WM_COMPILE_OPTION = Opt | Debug | Prof

export WM_COMPILE_OPTION=Opt



#- MPI implementation:

#    WM_MPLIB = SYSTEMOPENMPI | OPENMPI | MPICH | MPICH-GM | HPMPI

#               | GAMMA | MPI | QSMPI

export WM_MPLIB=OPENMPI



#- Operating System:

#    WM_OSTYPE = POSIX | ???

export WM_OSTYPE=POSIX



#- Floating-point signal handling:

#    set or unset

export FOAM_SIGFPE=



#- memory initialisation:

#    set or unset

#export FOAM_SETNAN=





################################################################################



# The old dirs to be cleaned from the various environment variables

# - remove anything under top-level directory.

# NB: the WM_PROJECT_INST_DIR might not be identical between versions

foamOldDirs="$FOAM_INST_DIR $WM_PROJECT_SITE $HOME/$WM_PROJECT/$USER"

if [ "$WM_PROJECT_INST_DIR" != "$FOAM_INST_DIR" ]

then

    foamOldDirs="$WM_PROJECT_INST_DIR $foamOldDirs"

fi





# Location of installation

# ~~~~~~~~~~~~~~~~~~~~~~~~

export WM_PROJECT_INST_DIR=$FOAM_INST_DIR

export WM_PROJECT_DIR=$WM_PROJECT_INST_DIR/$WM_PROJECT-$WM_PROJECT_VERSION



# Location of third-party software

# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

export WM_THIRD_PARTY_DIR=$WM_PROJECT_INST_DIR/ThirdParty-$WM_PROJECT_VERSION



# Location of site-specific templates etc

# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

# unset is equivalent to $WM_PROJECT_INST_DIR/site

if [ -d "$WM_PROJECT_SITE" ]

then

    export WM_PROJECT_SITE

else

    unset WM_PROJECT_SITE

fi



# Location of user files

# ~~~~~~~~~~~~~~~~~~~~~~

export WM_PROJECT_USER_DIR=$HOME/$WM_PROJECT/$USER-$WM_PROJECT_VERSION





# Source files, possibly with some verbosity

_foamSource()

{

    while [ $# -ge 1 ]

    do

        [ "$FOAM_VERBOSE" -a "$PS1" ] && echo "Sourcing: $1"

        . $1

       shift

    done

}



# Evaluate command-line parameters

_foamEval()

{

    while [ $# -gt 0 ]

    do

        case "$1" in

        -*)

            # stray option (not meant for us here) -> get out

            break

            ;;

        *=)

            # name=       -> unset name

            [ "$FOAM_VERBOSE" -a "$PS1" ] && echo "unset ${1%=}"

            eval "unset ${1%=}"

            ;;

        *=*)

            # name=value  -> export name=value

            [ "$FOAM_VERBOSE" -a "$PS1" ] && echo "export $1"

            eval "export $1"

            ;;

        *)

            # filename: source it

            if [ -f "$1" ]

            then

                _foamSource "$1"

            else

                _foamSource `$WM_PROJECT_DIR/bin/foamEtcFile -silent "$1"`

            fi

            ;;

        esac

        shift

    done

}





# Add in preset user or site preferences:

_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile prefs.sh`



# Evaluate command-line parameters and record settings for later

# these can be used to set/unset values, or specify alternative pref files

export FOAM_SETTINGS="$@"

_foamEval $@



# Clean standard environment variables (PATH, LD_LIBRARY_PATH, MANPATH)

# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

foamClean=$WM_PROJECT_DIR/bin/foamCleanPath



#- Clean PATH

cleaned=`$foamClean "$PATH" "$foamOldDirs"` && PATH="$cleaned"



#- Clean LD_LIBRARY_PATH

cleaned=`$foamClean "$LD_LIBRARY_PATH" "$foamOldDirs"` \

    && LD_LIBRARY_PATH="$cleaned"



#- Clean MANPATH

cleaned=`$foamClean "$MANPATH" "$foamOldDirs"` && MANPATH="$cleaned"



export PATH LD_LIBRARY_PATH MANPATH





# Source project setup files

# ~~~~~~~~~~~~~~~~~~~~~~~~~~

_foamSource $WM_PROJECT_DIR/etc/config/settings.sh

_foamSource $WM_PROJECT_DIR/etc/config/aliases.sh





# Source user setup files for optional packages

# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile config/paraview.sh`

_foamSource `$WM_PROJECT_DIR/bin/foamEtcFile config/ensight.sh`





# Clean environment paths again. Only remove duplicates

# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

#- Clean PATH

cleaned=`$foamClean "$PATH"` && PATH="$cleaned"



#- Clean LD_LIBRARY_PATH

cleaned=`$foamClean "$LD_LIBRARY_PATH"` && LD_LIBRARY_PATH="$cleaned"



#- Clean MANPATH (trailing ':' to find system pages)

cleaned=`$foamClean "$MANPATH"`: && MANPATH="$cleaned"



export PATH LD_LIBRARY_PATH MANPATH



#- Clean LD_PRELOAD

if [ -n "$LD_PRELOAD" ]

then

    cleaned=`$foamClean "$LD_PRELOAD"` && LD_PRELOAD="$cleaned"

    export LD_PRELOAD

fi





# cleanup environment:

# ~~~~~~~~~~~~~~~~~~~~

unset cleaned foamClean foamInstall foamOldDirs

unset _foamSource _foamEval



# ----------------------------------------------------------------- end-of-file





source $HOME/OpenFOAM/OpenFOAM-2.2.x/etc/bashrc