CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (https://www.cfd-online.com/Forums/openfoam-installation/)
-   -   Using different MPI toolboxes (https://www.cfd-online.com/Forums/openfoam-installation/122289-using-different-mpi-toolboxes.html)

levka July 30, 2013 13:12

Using different MPI toolboxes
 
Hello,cfd experts
can you please explain me how to compile different mpi architectures(| OPENMPI | MPICH | MPICH-GM | HPMPI | GAMMA | MPI | QSMPI). Can it be done with ThirdParty and how?

wyldckat August 16, 2013 08:17

Hi Lev,

I don't know if you've found out how to do this, but in the following post you'll find some summary information: http://www.cfd-online.com/Forums/ope...tml#post340456 - namely on post #2.
That post is assuming that you already have Intel's MPI installed on the system.

Best regards,
Bruno


All times are GMT -4. The time now is 15:17.