Problem with compiling swak4Foam
 

Hey fellow OpenFOAMers,

I'm trying to install the swak4Foam in order to use the groovyBC, however I run into trouble when running the ./Allwmake, the output is really long and appears to have some problems, please find the attachment.

I am running OpenFOAM 2.2.1 on Ubuntu 12.04 LTS. I have followed the instructions for swak given at http://openfoamwiki.net/index.php/Contrib/swak4Foam.

All help will be appreciated!

Which version of swak are you using. Because with the last releases compilation would have stopped after the first failure.

The problem is that the coordSet.H-header moved to a different location in OF2.2. The problem was taken care of on the 9th of March so the fix should be in the releases 0.2.3 and 0.2.4

Thank you Bernhard,

I tried with the 0.2.4 release, but it seems that there still are a few errors with the compilation.

Greetings to all!

@The_Architect: See this post: http://www.cfd-online.com/Forums/ope...tml#post434217 post #8


edit: I've updated the wiki page about this issue: http://openfoamwiki.net/index.php/Co...am#Downloading

Best regards,
Bruno

Thank you Bruno, it works now!