OpenFOAM on a 32 bit machine

samiam1000 · December 4, 2013, 03:48

Dear All,

I am writing since I have a problem that - I think - is trivial. But I can't solve it.

I usually run OpenFOAM on 64bit machines and everything usually is fine.

A couple of days ago, I tried OpenFOAM on a 32bit machine, running Debian Wheezy. I can't install it, because of some errors.

I give the command

Code:

./Allwmake > log

and in the terminal I get the message in the AllwmakeTerminal.zip file.

Also, attached, the log file (Allwmake1.zip and Allwmake2.zip). Could you help in finding what's wrong?

Thanks a lot,
Samuele

Bernhard · December 4, 2013, 04:06

Your logfiles only contain an error for paraview, but this is only thirdparty as fas as I can see. I think one attachment is missing?

samiam1000 · December 4, 2013, 04:18

You're right.

I forgot a file. Probably the most important

.

Thanks,
Samuele

samiam1000 · December 6, 2013, 09:57

Hi All,

has anyone have a look, by chance?

Thanks a lot,
Samuele

wyldckat · December 8, 2013, 13:30

Greetings to all!

@Samuele: Lets see... Debian Wheezy... http://openfoamwiki.net/index.php/In...#Debian_Wheezy points to here: http://openfoamwiki.net/index.php/In...u#Ubuntu_12.10 <- So I suggest that you try these instructions.

Or at the very least, run Allwmake like this:

Code:

./Allwmake > make.log 2>&1

This way the errors are recorded along with the output into the file "make.log".

Best regards,
Bruno

samiam1000 · December 8, 2013, 16:41

Forget about this: SOLVED!

Dear Bruno,

thanks for writing.

Actually, I get an error when I type

Code:

source $HOME/OpenFOAM/OpenFOAM-2.2.2/etc/bashrc WM_NCOMPPROCS=2 WM_MPLIB=SYSTEMOPENMPI WM_ARCH_OPTION=32

The error is:

Code:

lele@dirac:~/OpenFOAM$ source $HOME/OpenFOAM/OpenFOAM-2.2.2/etc/bashrc WM_NCOMPPROCS=2 WM_MPLIB=SYSTEMOPENMPI WM_ARCH_OPTION=32
Cannot open configuration file /home/lele/OpenFOAM/ThirdParty-2.2.2/platforms/linuxGcc/openmpi-1.6.3/share/openmpi/mpicc-wrapper-data.txt
Error parsing data file mpicc: Not found

and that's because the

Code:

mpicc-wrapper-data.txt

is not where it is looking for, but it is here:

Code:

lele@dirac:~/OpenFOAM/ThirdParty-2.2.2$ locate mpicc-wrapper-data.txt
/home/lele/OpenFOAM/ThirdParty-2.2.2/openmpi-1.6.3/ompi/tools/wrappers/mpicc-wrapper-data.txt.in 
/usr/share/openmpi/mpicc-wrapper-data.txt

How can I solve?

December 8, 2013, 13:30		#5
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings to all! @Samuele: Lets see... Debian Wheezy... http://openfoamwiki.net/index.php/In...#Debian_Wheezy points to here: http://openfoamwiki.net/index.php/In...u#Ubuntu_12.10 <- So I suggest that you try these instructions. Or at the very least, run Allwmake like this: Code: ./Allwmake > make.log 2>&1 This way the errors are recorded along with the output into the file "make.log". Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STAR-CCM+ 5.04.008 on a 32 bit machine	tobe	STAR-CCM+	6	July 25, 2012 01:27
OpenFOAM Installation on Debian-testing 64 bit	Afacci	OpenFOAM Installation	4	June 30, 2012 17:54
OpenFOAM vs Ubuntu 10.10 64 bit	vkrastev	OpenFOAM Installation	12	April 23, 2011 10:14
Problems installing OpenFoam on a 64bit machine	jango	OpenFOAM Installation	1	June 4, 2007 14:53
OpenFOAM Training and Workshop Zagreb 2628Jan2006	hjasak	OpenFOAM	1	February 2, 2006 21:07

December 4, 2013, 04:06		#2
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 21	Your logfiles only contain an error for paraview, but this is only thirdparty as fas as I can see. I think one attachment is missing?

December 6, 2013, 09:57		#4
samiam1000 Senior Member Samuele Z Join Date: Oct 2009 Location: Mozzate - Co - Italy Posts: 520 Rep Power: 18	Hi All, has anyone have a look, by chance? Thanks a lot, Samuele