[OpenFOAM.org] Problems installing OF4.1 in Kubuntu 14.04

Outbound · January 24, 2017, 10:02

Greetings,

For some reason I having issues installing OF4.1 on Kubuntu 14.04.

I had done it previously on another machine (some problems but fixable just due to folder permissions) but on this machine Iḿ unable to instal both ParaFOAM 5 and OF4.1.

The log files for OF installation are here and the ones for ParaFOAM here.

The computer is a 6 core i7 with 32GB ram and (perhaps most importantly) a Nvidia Quadro K620 running the latest Nvidia driver (Nouveau is deactivated).

Any help would be appreciated.

Thanks.

olesen · January 24, 2017, 16:13

You can ship around the cgal problem by something like this in the makeCGAL:

Code:

cmake ...
         -DWITH_CGAL_ImageIO=OFF \
         -DWITH_CGAL_Qt5=OFF \
...

This should prevent the imageIO from being built and remove your GL problem. This is probably how it should be anyhow (I'll enter an issue).

For your problem with paraview. Try making without mpi and python first and then proceed from there. I'm guessing that the python linkage may be the problem, but that's just a guess.

Outbound · January 24, 2017, 16:17

First of all, thanks for your reply.

I don't really understand what I have to change though. Is this a script in the cmake folder that I have to modify?

As for ParaView I suspect the same. I'll give it a go once a case is done and will report back to you.

Best regards,

Outbound · January 26, 2017, 10:28

I don't want to celebrate too early but it appears the cmake file change worked as OF41 has been building for a while.

ParaFoam however I haven't had any luck. I tried removing the python and mpi references from the make command (individually and both) and I can never get it to build. That particular python library file wasn't even in that directory. I only had it in a SALOME installation directory and had to copy it over. It doesn't seem to exist anywhere els on disk even though Python 2.7.6 is installed.

khedar · February 1, 2017, 20:43

Did you try from the deb packages? I think they should work just fine for kubuntu as well.

http://openfoam.org/download/4-1-ubuntu/

Outbound · February 2, 2017, 07:54

On this particular computer I ended up throwing in the towel and just reinstalled Ubuntu. At first I tried Ubuntu 14.04 but had problems with the graphic driver (neither the Nouveau nor the Nvidia drivers would work properly) and then ended up just going with Ubuntu 16.04 and the Nouveau driver and OF240. I can still install your BSL-EARSM turbulence model like I did for OF222 and OF231.

Cheers.

January 24, 2017, 10:02	Problems installing OF4.1 in Kubuntu 14.04	#1
Outbound Member António Soares Join Date: Mar 2015 Location: Lisbon, Portugal Posts: 48 Rep Power: 11	Greetings, For some reason I having issues installing OF4.1 on Kubuntu 14.04. I had done it previously on another machine (some problems but fixable just due to folder permissions) but on this machine Iḿ unable to instal both ParaFOAM 5 and OF4.1. The log files for OF installation are here and the ones for ParaFOAM here. The computer is a 6 core i7 with 32GB ram and (perhaps most importantly) a Nvidia Quadro K620 running the latest Nvidia driver (Nouveau is deactivated). Any help would be appreciated. Thanks. Last edited by Outbound; January 24, 2017 at 10:02. Reason: Mistake in title

January 24, 2017, 16:13		#2
olesen Senior Member Mark Olesen Join Date: Mar 2009 Location: https://olesenm.github.io/ Posts: 1,684 Rep Power: 40	You can ship around the cgal problem by something like this in the makeCGAL: Code: cmake ... -DWITH_CGAL_ImageIO=OFF \ -DWITH_CGAL_Qt5=OFF \ ... This should prevent the imageIO from being built and remove your GL problem. This is probably how it should be anyhow (I'll enter an issue). For your problem with paraview. Try making without mpi and python first and then proceed from there. I'm guessing that the python linkage may be the problem, but that's just a guess.

February 1, 2017, 20:43		#5
khedar Senior Member khedar Join Date: Oct 2016 Posts: 111 Rep Power: 9	Did you try from the deb packages? I think they should work just fine for kubuntu as well. http://openfoam.org/download/4-1-ubuntu/ Last edited by khedar; February 1, 2017 at 20:47. Reason: Edited link

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[waves2Foam] A few notes about problems and solutions when installing with OpenFOAM v1712	oceanFoam	OpenFOAM Community Contributions	0	June 22, 2018 08:52
[OpenFOAM.org] Paraview not found when installing OpenFoam to Ubuntu 14.04	tabsquare	OpenFOAM Installation	75	December 30, 2017 11:21
[OpenFOAM.com] v3.0+ Problems installing on Ubuntu 16.04	Evander	OpenFOAM Installation	3	March 26, 2017 14:47
Installing 2.3.0 on Ubuntu 14.04 LTS	siw	OpenFOAM Installation	6	July 5, 2014 06:16
Problems installing CFX on Sun Unix Platform	Haley	CFX	2	November 9, 2001 09:52

January 24, 2017, 16:17		#3
Outbound Member António Soares Join Date: Mar 2015 Location: Lisbon, Portugal Posts: 48 Rep Power: 11	First of all, thanks for your reply. I don't really understand what I have to change though. Is this a script in the cmake folder that I have to modify? As for ParaView I suspect the same. I'll give it a go once a case is done and will report back to you. Best regards,

January 26, 2017, 10:28		#4
Outbound Member António Soares Join Date: Mar 2015 Location: Lisbon, Portugal Posts: 48 Rep Power: 11	I don't want to celebrate too early but it appears the cmake file change worked as OF41 has been building for a while. ParaFoam however I haven't had any luck. I tried removing the python and mpi references from the make command (individually and both) and I can never get it to build. That particular python library file wasn't even in that directory. I only had it in a SALOME installation directory and had to copy it over. It doesn't seem to exist anywhere els on disk even though Python 2.7.6 is installed.

February 2, 2017, 07:54		#6
Outbound Member António Soares Join Date: Mar 2015 Location: Lisbon, Portugal Posts: 48 Rep Power: 11	On this particular computer I ended up throwing in the towel and just reinstalled Ubuntu. At first I tried Ubuntu 14.04 but had problems with the graphic driver (neither the Nouveau nor the Nvidia drivers would work properly) and then ended up just going with Ubuntu 16.04 and the Nouveau driver and OF240. I can still install your BSL-EARSM turbulence model like I did for OF222 and OF231. Cheers.