CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (http://www.cfd-online.com/Forums/openfoam-installation/)
-   -   Numerical wave tank (http://www.cfd-online.com/Forums/openfoam-installation/57268-numerical-wave-tank.html)

michaelp February 6, 2008 16:02

I am trying to setup a numeric
 
I am trying to setup a numerical wave tank using ../OpenFOAM/OpenFOAM-1.4.1-dev/applications/solvers/surfaceTracking

results from foamInstallationTest show that everything looks ok

-------------------------------------------------------------------------------
.....
.....
Base configuration ok.
Critical systems ok.
-------------------------------------------------------------------------------


However, when I try to compile /home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/Allwmake
I get well into the build and then

+ ./Allwmake
+ cd solvers
+ wmake all
+ wmake surfactantFoam
make[2]: `/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/applications/bin/linuxGccDPOpt/turbDyMF oam' is up to date.
make[1]: `/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/applications/bin/linuxGccDPOpt/surfacta ntFoam' is up to date.
+ wmake libso freeSurface
make[2]: `/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/applications/bin/linuxGccDPOpt/transien tSimpleFoam' is up to date.
`/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt/libfreeSurface.so' is up to date.
+ wmake sloshingInterTrackFoam
make[2]: `/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/applications/bin/linuxGccDPOpt/nonNewto nianIcoFoam' is up to date.
make[2]: `/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/applications/bin/linuxGccDPOpt/icoDyMFo am' is up to date.
g++ -m32 -Dlinux -DDP -Wall -Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -O3 -DNoRepository -ftemplate-depth-40 -I../freeSurface -I/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/src/finiteArea/lnInclude -I/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/src/finiteVolume/lnInclude -I/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/src/meshTools/lnInclude -I/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/src/dynamicMesh/lnInclude -I/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/src/tetDecompositionFiniteElement/lnIn clude -I/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/src/tetDecompositionMotionSolver/lnInc lude -IlnInclude -I. -I/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/src/OpenFOAM/lnInclude -fPIC -pthread Make/linuxGccDPOpt/sloshingInterTrackFoam.o -L/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt \
-lfreeSurface -lfiniteArea -lfiniteVolume -ldynamicMesh -lmeshTools -lOpenFOAM -ldl -lm -o /home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/applications/bin/linuxGccDPOpt/sloshingI nterTrackFoam
/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt/libfreeSurface.so: undefined reference to `typeinfo for Foam::faceTetPolyPatchFaceDecomp'
/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt/libfreeSurface.so: undefined reference to `Foam::faceTetPolyPatchFaceDecomp::patch() const'
/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt/libfreeSurface.so: undefined reference to `Foam::tetPolyMeshFaceDecomp::operator!=(Foam::tet PolyMeshFaceDecomp const&) const'
/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt/libfreeSurface.so: undefined reference to `Foam::faceTetPolyPatchFaceDecomp::typeName'
/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt/libfreeSurface.so: undefined reference to `typeinfo for Foam::tetDecompositionMotionSolver'
/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt/libfreeSurface.so: undefined reference to `Foam::tetPolyPatchInterpolationFaceDecomp::tetPol yPatchInterpolationFaceDecomp( Foam::faceTetPolyPatchFaceDecomp const&)'
/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/lib/linuxGccDPOpt/libfreeSurface.so: undefined reference to `Foam::GeometricField<foam::vector<double>, Foam::tetPolyPatchField, Foam::tetPointMesh>::debug'
collect2: ld returned 1 exit status
make[1]: *** [/home/mdp28/OpenFOAM/OpenFOAM-1.4.1-dev/applications/bin/linuxGccDPOpt/sloshing InterTrackFoam] Error 1

Any suggestions on what might be going wrong would be greatly appreciated.

ned_minns December 17, 2008 09:27

Dear Michael I'm planning t
 
Dear Michael

I'm planning to use OpenFOAM for the analysis of a wave energy converter and an interested to hear if you got your simulated wave tank going in the end.

If you have any other advice it would be much appreciated too!

Hope to hear from you soon
Ned


All times are GMT -4. The time now is 04:04.