|
[Sponsors] |
July 2, 2007, 07:53 |
2 Stian : OpenFOAM directory s
|
#21 |
Member
Ruben I. Mukhamadeev
Join Date: Mar 2009
Location: Obninsk, Kaluga reg., Russian Federation
Posts: 69
Rep Power: 17 |
2 Stian : OpenFOAM directory structure and bashrc/cshrc files in your directory (home/stian) should be :
OpenFOAM/OpenFOAM-1.4/.OpenFOAM-1.4/(bashrc & cshrc) OpenFOAM/OpenFOAM-1.4/(.bashrc & .cshrc) So, 1. Check how you unpack distributive packs 2. Add string source OpenFOAM/OpenFOAM-1.4/.bashrc (or .cshrc) to the file hidden file /home/Stian/,bashrc I think, that tests of installation : OpenFOAM/OpenFOAM-1.4/bin/foamInstallationTest will be good regards ruben |
|
July 2, 2007, 12:31 |
Look like I got a few problems
|
#22 |
New Member
stian moltubakk
Join Date: Mar 2009
Posts: 9
Rep Power: 17 |
Look like I got a few problems
gcc 4.1.2 WARNING: Conflicting installations: foam settings: /home/Stian/OpenFOAM/linux/gcc-4.1.2-64/bin/gcc current path : /usr/bin/gcc CRITICAL ERROR icoFoam *** not installed *** CRITICAL ERROR Test_rsh: Unsuccessful_connection_refused* yes Test_ssh: Unsuccessful_connection_refused* yes FATAL ERROR: No remote shell available. Foam1.4 enviroment requires either ssh and/or rsh. Contact your system administrator. |
|
July 3, 2007, 02:18 |
OF needs own version of compil
|
#23 |
Member
Ruben I. Mukhamadeev
Join Date: Mar 2009
Location: Obninsk, Kaluga reg., Russian Federation
Posts: 69
Rep Power: 17 |
OF needs own version of compiler to correct installation. You need to:
1. Download & unpack gcc4.1.2, java & paraview to the directory OpenFOAM/linux(64) so you have OpenFOAM/linux(64)/gcc-1.4.2 OpenFOAM/linux(64)/paraview-2.4.4 OpenFOAM/linux(64)/java-1.4.2_05 2. You should install ssh or rsh from your RH distibutive disk using rpm (or other packet manager) 64 - if you use 64-bit based distribution. regards Ruben |
|
July 9, 2007, 06:48 |
I am a new user of Linux; I ha
|
#24 |
New Member
benyahia nabil
Join Date: Mar 2009
Location: Cheraga, Alger, ALGERIA
Posts: 4
Rep Power: 17 |
I am a new user of Linux; I have installed redhat9.0 for install a Openfoam-1.3. In installation of Openfoam-1.3 I follow instruction in file readme. But when I start installation of GCC the message is: Permission non accordée.
In installation of redhat I create session her name is nabil, in this session I crest file Open FOAM To install OpenFOAM, I flowing thus instruction. The first instruction is: $HOME/OpenFOAM/OpenFOAM-4.1.2/.OpenFOAM-1.3/bashrc The second instruction is: $WM_PROJECT_INST_DIR/$WM_ARCH/gcc-4.1.2 But here indicate that Permission non accordée. The same for third instruction, $WM_PROJECT_DIR/.bashrc After he install normally openfoam, but in testing the installation indicates tow critical errors and one fatal error I hope that you help, thank you |
|
July 9, 2007, 07:35 |
2 benyahia nabit
See previo
|
#25 |
Member
Ruben I. Mukhamadeev
Join Date: Mar 2009
Location: Obninsk, Kaluga reg., Russian Federation
Posts: 69
Rep Power: 17 |
2 benyahia nabit
See previous posts: correct installation should has following structure : OpenFOAM/OpenFOAM-1.4/.OpenFOAM-1.4 OpenFOAM/OpenFOAM-1.4/application OpenFOAM/OpenFOAM-1.4/bin OpenFOAM/OpenFOAM-1.4/lib OpenFOAM/OpenFOAM-1.4/src OpenFOAM/OpenFOAM-1.4/wmake OpenFOAM/linux(64)/gcc-4.1.2 OpenFOAM/linux(64)/paraview-x.x.x OpenFOAM/linux(64)/java-x.x.x OpenFOAM/jobControl OpenFOAM/nabil-1.4 OpenFOAM/run (x.x.x - is a version number) 64-if you use 64-bit version of Linux distrib So, you need to: 1. create OpenFOAM dir in your home directory (home/nabil/OpenFOAM) and unpack both distibutive archieves into it. 2. make linux(64) dir and unpack gcc, java & paraview into it. 3 it should be created jobContol, nabil-1.4 & run directories (see dir structure). 4. you need add a string: source OpenFOAM/OpenFOAM-1.4/.OpenFOAM-1.4/bashrc into the end of hidden file .bashrc in directory /home/nabil to set the environment Try, it should help 8-) Regards ruben |
|
|
|