CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (http://www.cfd-online.com/Forums/openfoam-installation/)
-   -   RunFoamX and IP address (http://www.cfd-online.com/Forums/openfoam-installation/57730-runfoamx-ip-address.html)

billy July 5, 2005 16:17

Hi, I can work with runFoam
 
Hi,

I can work with runFoamX as long as I don't change my IP address. How do I use dynamic IP adresses and keep OpenFOAM running.

mattijs July 6, 2005 06:21

Are you running on your local
 
Are you running on your local machine?

runFoamX uses the name of the machine. Have a look inside the script. It gets the hostname ($HOSTNAME) either from your FoamXClient.cfg file or from `uname -n`. Either way your o.s. should adapt the tables such that the hosntame resolves to the correct IP address.

Alternatively set in the FoamXClient.cfg the org.omg.CORBA.ORBInitialHost variable to 'localhost' which should be a special address.
(127.0.0.1) which always resolves to your local machine.

ztdep July 19, 2005 01:50

Dear: i meet the following
 
Dear:
i meet the following proble,when i perrform a installcheck, please tell me how to active the rsh and ssh ,thank you very much!

...ng_28h219.xjtu.edu.cn ...ry_for_"28h219.xjtu.edu.cn"_in_/etc/hosts yes
WARNING: CRITICAL ERROR

Pinging_localHost Successful yes
Test_rsh: Not_active* yes
Test_ssh: Not_active* yes
FATAL ERROR: No remote shell available.
Foam1.1 enviroment requires either ssh and/or rsh.
Contact your system administrator.


All times are GMT -4. The time now is 20:08.