CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (http://www.cfd-online.com/Forums/openfoam-installation/)
-   -   Will OpenFoam work on Xeon (http://www.cfd-online.com/Forums/openfoam-installation/57747-will-openfoam-work-xeon.html)

segersson May 2, 2005 08:09

Hi, We are planning to upgrad
 
Hi,
We are planning to upgrade our CFD-hardware, and I just wanted to make sure that it will be possible to run OpenFOAM on the new hardware.

Can the binaries provided for Linux/Pentium be expected to work on a machine with two Intel Xeon processors running Red Hat Enterprise Linux ES 3?

Regards
David

mattijs May 2, 2005 08:31

Probably yes. We're not runnin
 
Probably yes. We're not running Redhat over here so cannot test.

But you can always recompile from sources. As long as you make sure the gcc compiler you are using is the correct one (3.4.3 for OpenFoam1.1)

grtabor May 2, 2005 08:45

I'm running (according to dmes
 
I'm running (according to dmesg) on twin Intel Xeon 3.06GHz processors under RH8. No problems AFAIK.

Gavin


All times are GMT -4. The time now is 22:11.