|
[Sponsors] |
Ercoftacs RotorStatorInterfaces compilation under 1.5-dev |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 26, 2010, 07:52 |
Ercoftacs RotorStatorInterfaces compilation under 1.5-dev
|
#1 |
New Member
Stylianos Kyriacou
Join Date: Mar 2010
Location: Cyprus - Athens - Austria - Zurich
Posts: 27
Rep Power: 16 |
Hello fellow Foamers,
I've trying to compile the RotorStator Interfaces from the ercoftac Turbomachinery repo under OF-1.5-dev (in the README file it actually says "This version works only for OpenFOAM-1.5-dev") but i get the following error: make: *** No rule to make target `/home/open_foam_user/OpenFOAM/OpenFOAM-1.5-dev/src/meshTools/lnInclude/cylindricalCS.H', needed by `domainScaling/primitiveDomainScalingPatch/primitiveDomainScalingPatch.dep'. Stop. I 've checked in .../OpenFOAM-1.5-dev/src/meshTools/lnInclude and there is not a cylindrical.* I'm thinking this is a versioning thing since if i remember correctly this is present in OpenFOAM-1.5. Would really appreciate some help on the subject, Stelios p.s. many thanks to Franz Blaim for developing this .. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFOAM 1.5 dev | LVDH | OpenFOAM | 98 | May 5, 2010 17:01 |
[OpenFOAM] ParaView/ParaFoam in OpenFoam 1.5 dev | titio | ParaView | 2 | February 27, 2010 14:02 |
[OpenFOAM] Paraview/Parafoam in OpenFoam 1.5 dev | titio | ParaView | 0 | December 9, 2009 12:13 |
[OpenFOAM] Paraview/Parafoam in OpenFoam 1.5 dev | titio | ParaView | 0 | December 9, 2009 12:12 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |