CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (http://www.cfd-online.com/Forums/openfoam-installation/)
-   -   OpenFOAM-1.7.x MAC OS X foamToTecplot360 issue (http://www.cfd-online.com/Forums/openfoam-installation/82030-openfoam-1-7-x-mac-os-x-foamtotecplot360-issue.html)

haewon November 14, 2010 03:05

OpenFOAM-1.7.x MAC OS X foamToTecplot360 issue
 
Hi.

I had compiled successfully the OpenFOAM-1.7.x MAC OS X version including foamToTecplot360.
Slight modification for tecioOptions file under foamToTecplot360/tecio/tecsrc/Make will do the job.

Here is what my tecioOptions file reads:

#if defined(linux64)

TECIO_FLAGS = -DMAKEARCHIVE -DLINUX -DLINUX64 -DUSEENUM -DTHREED -U_WIN32

#elif defined(linuxIA64)

TECIO_FLAGS = -DMAKEARCHIVE -DLINUX -DLINUXI64 -DUSEENUM -DTHREED -U_WIN32

#elif defined(linux)

TECIO_FLAGS = -DMAKEARCHIVE -DLINUX -DUSEENUM -DTHREED -U_WIN32

#elif defined(darwinIntel)

TECIO_FLAGS = -DMAKEARCHIVE -DDARWIN -DLONGIS64 -DUSEENUM -DTHREED -U_WIN32 -I/usr/X11R6/include

#elif defined(darwinIntel64)

TECIO_FLAGS = -DMAKEARCHIVE -DDARWIN -DLONGIS64 -DUSEENUM -DTHREED -U_WIN32 -I/usr/X11R6/include

#else

# error architecture not supported for compiling tecio.

#endif

TECIO_INC =
TECIO_LIBS =

Cheers!


All times are GMT -4. The time now is 16:32.