Offline installation

eric weddle · October 27, 2011, 04:07

Hello there.

I'd like to know if there's anyway to install OpenFOAM Ubuntu package in a machine with no internet connection.

Thanks

Bernhard · October 27, 2011, 08:05

Did you try to copy the source pack from a USB disk?

eric weddle · October 27, 2011, 08:16

actually, i could only manage download the pack using the "apt-get install" command

Bernhard · October 27, 2011, 08:21

You can download the source pack here:
http://www.openfoam.com/download/source.php

If you follow the instructions this should be no problem. Good luck

eric weddle · October 27, 2011, 08:23

tanks a lot

danishdude · October 27, 2011, 12:42

I recently had a similar predicament where I was trying to load OpenFOAM onto a machine that was not connected to the internet. The problem I ran into was that you can easily download and compile OpenFOAM source files, but getting dependences (Flex, Qt, etc...) is a pain in the neck. However, I found a really simple solution. This requires that you either have another machine that is connected to the internet and has the same version of Ubuntu installed (which was what I did) or you could use VirtualBox to virtually install a machine similar to the one you are trying to work with. There is a tool called APTonCD. Available at this link http://aptoncd.sourceforge.net/. You run the tool, and it allows you to create an APT repository from all the files currently installed via apt on your computer. This way, you merely load OpenFOAM on the machine that has the internet connection using APT, all dependencies are installed automatically, and then you use APTonCD to transfer this "custom" repository to the machine that does not have an internet connection. This is also a great way to transfer updates to the machine without an internet connection. Good Luck!

salehi144 · December 9, 2013, 09:56

Dear Michael,

I have the same problem of installing OF offline. As you correctly mentioned get it with all dependencies is a pain in the neck! So i tried to do what you said about APTonCD. It turned out there is no more such software in sourceforge.

So, any suggestion?

Thanks,

brugiere_olivier · December 9, 2013, 11:29

Dear Saeed,

You can try to install OpenFOAM from the source package.
If you want the version 2.2.2 is very easy you need to download gcc, gmp, cmake, mpc and mpfr and after you will follow the instruction from : http://openfoamwiki.net/index.php/In...M-2.2.0/Ubuntu

I've already done for CentOs and my computer offline. It's ok on my computer now

October 27, 2011, 04:07	Offline installation	#1
eric weddle New Member Join Date: Sep 2011 Posts: 12 Rep Power: 14	Hello there. I'd like to know if there's anyway to install OpenFOAM Ubuntu package in a machine with no internet connection. Thanks

October 27, 2011, 12:42	APTonCD	#6
danishdude New Member Michael Ahlmann Join Date: Feb 2010 Posts: 27 Rep Power: 16	I recently had a similar predicament where I was trying to load OpenFOAM onto a machine that was not connected to the internet. The problem I ran into was that you can easily download and compile OpenFOAM source files, but getting dependences (Flex, Qt, etc...) is a pain in the neck. However, I found a really simple solution. This requires that you either have another machine that is connected to the internet and has the same version of Ubuntu installed (which was what I did) or you could use VirtualBox to virtually install a machine similar to the one you are trying to work with. There is a tool called APTonCD. Available at this link http://aptoncd.sourceforge.net/. You run the tool, and it allows you to create an APT repository from all the files currently installed via apt on your computer. This way, you merely load OpenFOAM on the machine that has the internet connection using APT, all dependencies are installed automatically, and then you use APTonCD to transfer this "custom" repository to the machine that does not have an internet connection. This is also a great way to transfer updates to the machine without an internet connection. Good Luck!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFoam 2.0.0 installation	Jan_Peters	OpenFOAM Installation	86	April 27, 2012 05:32
CFX11 + Fortran compiler ?	Mohan	CFX	20	March 30, 2011 18:56
Installation problems	indy	OpenFOAM Installation	7	April 3, 2009 09:40
64bitrhel5 OF installation instructions	mirko	OpenFOAM Installation	2	August 12, 2008 18:07
Installation problems	shellbell1999	OpenFOAM Installation	9	April 6, 2006 13:29

October 27, 2011, 08:05		#2
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 21	Did you try to copy the source pack from a USB disk?

October 27, 2011, 08:16		#3
eric weddle New Member Join Date: Sep 2011 Posts: 12 Rep Power: 14	actually, i could only manage download the pack using the "apt-get install" command

October 27, 2011, 08:21		#4
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 21	You can download the source pack here: http://www.openfoam.com/download/source.php If you follow the instructions this should be no problem. Good luck

October 27, 2011, 08:23		#5
eric weddle New Member Join Date: Sep 2011 Posts: 12 Rep Power: 14	tanks a lot

December 9, 2013, 09:56		#7
salehi144 New Member Saeed Salehi Join Date: Aug 2010 Posts: 27 Rep Power: 15	Dear Michael, I have the same problem of installing OF offline. As you correctly mentioned get it with all dependencies is a pain in the neck! So i tried to do what you said about APTonCD. It turned out there is no more such software in sourceforge. So, any suggestion? Thanks,

December 9, 2013, 11:29		#8
brugiere_olivier Member Brugiere Olivier Join Date: Mar 2009 Posts: 34 Rep Power: 17	Dear Saeed, You can try to install OpenFOAM from the source package. If you want the version 2.2.2 is very easy you need to download gcc, gmp, cmake, mpc and mpfr and after you will follow the instruction from : http://openfoamwiki.net/index.php/In...M-2.2.0/Ubuntu I've already done for CentOs and my computer offline. It's ok on my computer now