|
[Sponsors] |
December 14, 2011, 16:56 |
Can't mpirun anymore?
|
#1 |
Member
Pierre
Join Date: Sep 2010
Posts: 57
Rep Power: 15 |
Hi everyone,
i used to run OpenFOAM cases on 4 cores with mpirun. For example after deconstructing: mpirun -np 4 interFoam -parallel Since I installed the new Kubuntu 11.10 i get this error message: Mpirun aborted blabla couldn't find executable InterFoam What does that mean? I found one thread and he solved the problem by adding a line to the bashrc, but i had this line allready in it (it was source /opt/.. like in the manual for the Foam installation) Any tips? Thanks! leech |
|
December 15, 2011, 17:30 |
|
#2 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128 |
Greetings Leech,
Try running it this way instead: Code:
foamJob -s -p interFoam Best regards, Bruno
__________________
|
|
December 16, 2011, 09:38 |
|
#3 |
Member
Pierre
Join Date: Sep 2010
Posts: 57
Rep Power: 15 |
Thanks a lot !
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
what is wrong with the mpirun parameter -mca ? | donno | OpenFOAM | 7 | February 2, 2023 22:12 |
mpirun hangup.. can anyone help how to fix mpirun issues. | prameelar | OpenFOAM | 12 | February 16, 2022 17:23 |
Problem with mpirun with OpenFOAM | jiejie | OpenFOAM | 3 | July 7, 2010 20:30 |
Naca0012 k-e mpirun gives fpe whereas simpleFoam not | Pierpaolo | OpenFOAM | 1 | May 8, 2010 04:08 |
MPIRUN fails | lfbarcelo | OpenFOAM | 3 | March 29, 2010 08:41 |