CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (http://www.cfd-online.com/Forums/openfoam-installation/)
-   -   ParaView not working after some installations (http://www.cfd-online.com/Forums/openfoam-installation/99160-paraview-not-working-after-some-installations.html)

aerospain March 27, 2012 11:48

ParaView not working after some installations
 
Greetings,

I'm having some trouble running ParaView after trying to install enGrid. With OpenFOAM and ParaView installed in my Ubuntu box, following the DEB installation from openfoam webpage, and after following the steps shown at enGrid's webpage, two things happen:
(1) enGrid cannot load, and
(2) paraview gives me the following error message
>>>>>
ERROR: In /home/opencfd/OpenFOAM/ThirdParty-dev/ParaView-3.12.0/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 404
vtkXOpenGLRenderWindow (0x316b7f0): Could not find a decent visual



ERROR: In /home/opencfd/OpenFOAM/ThirdParty-dev/ParaView-3.12.0/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 404
vtkXOpenGLRenderWindow (0x316b7f0): Could not find a decent visual



X Error: BadValue (integer parameter out of range for operation) 2
Extension: 135 (Uknown extension)
Minor opcode: 3 (Unknown request)
Resource id: 0x21
ERROR: In /home/opencfd/OpenFOAM/ThirdParty-dev/ParaView- 3.12.0/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 629
vtkXOpenGLRenderWindow (0x316b7f0): Cannot create GLX context.
<<<<<
I've tried uninstalling everything and reinstalling again with no luck.

Any suggestions?

Thanks

wyldckat March 28, 2012 15:26

For future readers, this thread is sort-of continued here: Installing OpenFOAM 2.1 and enGrid


All times are GMT -4. The time now is 08:47.