CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: blockMesh (http://www.cfd-online.com/Forums/openfoam-meshing-blockmesh/)
-   -   OF 1.6-ext Number of edges not aligned with or perpendicular to non-empty directions (http://www.cfd-online.com/Forums/openfoam-meshing-blockmesh/110800-1-6-ext-number-edges-not-aligned-perpendicular-non-empty-directions.html)

esteban88 December 21, 2012 04:26

OF 1.6-ext Number of edges not aligned with or perpendicular to non-empty directions
 
1 Attachment(s)
hey guys,

i'm trying to simulate a piloted jetflame with OpenFOAM. First I used OpenFOAM version 1.7.1 and there i've got no errors after checkMesh.

But for a correct chemistry-model-function i have to use the version 1.6-ext. With this version i get with the same mesh the checkMesh error "Number of edges not aligned with or perpendicular to non-empty directions: 10904"

Additionally checkMesh shows a wrong aspect ratio: in version 1.7.1 it is something about 66 and in version 1.6-ext something about 500 in the mesh with least cells.

sorry for my bad english, its not my native language.

I hope anyone can help me. Thank you!
My operating system is Ubuntu 12.04 64bit


All times are GMT -4. The time now is 16:27.