CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[blockMesh] Wall mounted Hump 2d

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree2Likes
  • 2 Post By Yann

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 19, 2023, 00:32
Default Wall mounted Hump 2d
  #1
New Member
 
Naive CFD
Join Date: Jun 2021
Posts: 25
Rep Power: 4
Deep111090 is on a distinguished road
Hi All, Is there any online resource for setting up the 2D wall-mounted hump case in OpenFOAM. This is a standard case in the NASA turbulence repository, and due to my limited knowledge of mesh generation in OpenFOAM, I am finding it hard to create a blockmesh dict for the geometry. For reference i am adding the link to the case : https://turbmodels.larc.nasa.gov/nasahump_val.html
Deep111090 is offline   Reply With Quote

Old   July 19, 2023, 04:58
Default
  #2
Senior Member
 
Yann
Join Date: Apr 2012
Location: France
Posts: 1,026
Rep Power: 25
Yann will become famous soon enough
Hello,

First thing you can try is searching into the tutorials, for instance with this command:

Code:
grep -ri "hump" $FOAM_TUTORIALS
If you are using the ESI-OpenCFD branch (openfoam.com), this should lead you to this tutorial, which, luckily, seems to be exactly the case you are looking for:
https://develop.openfoam.com/Develop...allMountedHump

Unfortunately this case is not available in the OpenFOAM foundation branch (openfoam.org).

If this is the branch you are using, you could get the mesh from the link above and adapt the case to the version you are using. However if you are just beginning with OpenFOAM I would strongly recommend to install the latest version of the OpenCFD branch. Learning OpenFOAM is already time-consuming, it will spare you a lot of struggle to adapt the case to another version.

Cheers,
Yann
AtoHM and lpz456 like this.
Yann is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
temperature correction limited- Star ccm+ LpSingh STAR-CCM+ 15 September 29, 2020 12:06
What's the problem with turbulence models near the wall region? Jaydi_21 Main CFD Forum 6 July 7, 2017 03:39
Very technical question about solving wall boundary layer ... jlb001 FLUENT 6 December 27, 2014 06:56
[Commercial meshers] tmerge utility creates unwanted interface/walls comes in the final mesh Shoonya OpenFOAM Meshing & Mesh Conversion 11 January 20, 2012 07:23
UDF for wall slipping HFLUENT Fluent UDF and Scheme Programming 0 April 27, 2011 13:03


All times are GMT -4. The time now is 01:38.