PolySpline question
 

Hello!

I have a problem using the polySpline in blockMesh, does anyone know the syntax that must be used? It have not found it anywhere!

Thanks,

Steinar

If I remember correctly the sy
 

If I remember correctly the syntax is

polySpline pntA pntB ( (ctrl1) (ctrl2) ... (ctrlN) ) grad_pntA grad_pntB;

where (pntA,grad_pntA) and (pntB,grad_pntB) are the coordinates and the gradients at the end points of the curve, and the (ctrl) are controlpoints.

Use the search facility to search for polySpline. I recall reading about it in the forum.

Yes, this syntax is accepted b
 

Yes, this syntax is accepted by blockMesh, but the gradients are giving me unexpected results.

I really think I need some kind of B-splines to avoid the disturbances near the end points, and they are not implemented in OF?

go to the bugs list there is t
 

go to the bugs list there is the solution or
search for "Bugs in polySplineEdge.C"

What kind of unexpected result
 

What kind of unexpected results? If you mean erratic shapes, like loops, this may happen for unevenly spaced data points if the algorithm that calculates the control points assigns uniformly spaced parameter values to the data points.

Looking at the implementation in

applications/utilities/mesh/generation/blockMesh/curvedEdges

this does indeed appear to be the case. You could try to specify the gradients to zero in which case polySpline calculates them as a finite-difference (Catmull-Rom).

polySpline in OpenFOAM is a clamped cubic B-Spline.

Dear Martin, I got trouble
 

Dear Martin,

I got trouble with the polySpline as well. Poorly I did not understand any word of what you said.

HOW can I get the polySpline work?

The polySpline works fine at the beginning. but towards the end point it starts to become a straight line. the given gradient is ignored as well.

..?

Thanks