|December 19, 2007, 20:43||
I'm trying to modify a model f
Join Date: Mar 2009
Posts: 4Rep Power: 9
I'm trying to modify a model for flow around a 180 degree bend by collapsing the corner blocks into a wedge shape, so that they have a 45 degree angle rather than a 90 degree angle. I'm having trouble with the generated mesh and was hoping someone could help. The link below shows the mesh.
As you can see from the image, the corners are successfully collapsed, but the mesh is collapsed as well, resulting in a cell distribution that isn't smooth. I'd like for the gridlines to follow the same straight lines as in the uncollapsed blocks. The cells on the collapsed edge would be wedges, in that case.
Any ideas on how to do this? Thanks
|Thread||Thread Starter||Forum||Replies||Last Post|
|Wedge geometry with two blocks||sega||OpenFOAM Native Meshers: blockMesh||3||January 7, 2012 10:04|
|Mesh containing 9 blocks Whats wrong||sega||OpenFOAM Native Meshers: blockMesh||14||July 26, 2008 07:49|
|Wedge Shaped Hopper||Arun||FLUENT||0||December 31, 2007 07:27|
|Grid generation for a wedge||Rucy||FLUENT||1||May 16, 2005 06:45|
|Connecting blocks with multi-blocks methods||Sebastien Perron||Main CFD Forum||3||March 7, 2001 17:55|