CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: blockMesh (http://www.cfd-online.com/Forums/openfoam-meshing-blockmesh/)
-   -   Problem with blockMesh and cyclics (http://www.cfd-online.com/Forums/openfoam-meshing-blockmesh/61851-problem-blockmesh-cyclics.html)

mattijs May 25, 2006 06:34

checkMesh tells me that your m
 
checkMesh tells me that your mesh and cyclics are topologically ok. However the mesh is not very good , there are lots of distorted cells (max. non-orthogonality, max skewness). Try your problem with a better mesh with the same topology.

kukikano May 26, 2006 07:41

Mattijs, Thanks for your re
 
Mattijs,

Thanks for your reply. I improved the mesh and now it all looks a lot better. It was indeed my very poor original mesh that was the problem, not the coupling of the cyclics.

Regards,

Rikard


All times are GMT -4. The time now is 04:33.