CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Native Meshers: blockMesh

Problem with blockMesh and cyclics

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 25, 2006, 05:34
Default checkMesh tells me that your m
Super Moderator
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,416
Rep Power: 16
mattijs is on a distinguished road
checkMesh tells me that your mesh and cyclics are topologically ok. However the mesh is not very good , there are lots of distorted cells (max. non-orthogonality, max skewness). Try your problem with a better mesh with the same topology.
mattijs is offline   Reply With Quote

Old   May 26, 2006, 06:41
Default Mattijs, Thanks for your re
New Member
Rikard Mikalsen
Join Date: Mar 2009
Posts: 10
Rep Power: 8
kukikano is on a distinguished road

Thanks for your reply. I improved the mesh and now it all looks a lot better. It was indeed my very poor original mesh that was the problem, not the coupling of the cyclics.


kukikano is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
BlockMesh problem pratap OpenFOAM Native Meshers: blockMesh 21 February 16, 2009 07:32
Run blockMesh problem fpetit OpenFOAM Installation 9 January 10, 2008 06:40
Problem in Memory by running blockMesh mamaly60 OpenFOAM Running, Solving & CFD 4 November 2, 2007 14:56
BC with blockMesh ville OpenFOAM Native Meshers: blockMesh 1 December 4, 2006 06:11
Blockmesh problem about skewness aderliner OpenFOAM Native Meshers: blockMesh 0 December 1, 2006 22:04

All times are GMT -4. The time now is 22:35.