CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: blockMesh

Default patches not appearing in paraview

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 8, 2010, 12:09
Default Default patches not appearing in paraview
  #1
Senior Member
 
jeff osborne
Join Date: Mar 2010
Posts: 108
Rep Power: 7
ozzythewise is on a distinguished road
Hello all,

I am trying to create a mesh with OF and I get this warning when I compile:

--> FOAM Warning :
From function polyMesh:olyMesh(... construct from shapes...)
in file meshes/polyMesh/polyMeshFromShapeMesh.C at line 577
Found 1 undefined faces in mesh; adding to default patch.

Now usually I know that means that one face isn't defined in my patches but for the life of me I can't figure out where. In addition, when I open up paraview I cannot see any default patches to help me identify where I forgot to define it. I've attached a screenshot of my paraview window with the object inspector open. Notice how there is no place to select default patches. Below is also a copy of my blockMeshDict file:

convertToMeters 1;

vertices
(
(0 1.438 0) //0
(0.534 2.28 0) //1
(0.534 8.0353 0) //2
(8.053 0 0) //3
(3.4512 0 0) //4
(3.4512 0.719 0) //5
(0 1.438 0.1) //6
(0.534 2.28 0.1) //7
(0.534 8.0353 0.1) //8
(8.053 0 0.1) //9
(3.4512 0 0.1) //10
(3.4512 0.719 0.1) //11
(8.021 0.719 0) //12
(8.021 0.719 0.1) //13
);

blocks
(
hex (0 5 5 1 6 11 11 7) (10 10 1) simpleGrading (1 1 1)
hex (1 5 12 2 7 11 13 8) (10 10 1) simpleGrading (1 1 1)
hex (4 3 12 5 10 9 13 11) (10 10 1) simpleGrading (1 1 1)

);

edges
(
simpleSpline 0 5 (
(0.5752 1.114 0)
(1.15 0.9347 0)
(2.013 0.7909 0)
)
simpleSpline 6 11(
(0.5752 1.114 0.1)
(1.15 0.9347 0.1)
(2.013 0.7909 0.1)
)
arc 2 12 (5.694 5.694 0)
arc 8 13 (5.694 5.694 0.1)
arc 12 3 (8.04496 0.3598 0)
arc 13 9 (8.04496 0.3598 0.1)
);

patches
(
patch exhaustInlet
(
(7 1 0 6)
)
patch externalInlet
(
(8 2 1 7)
)
patch Outlet
(
(13 9 3 12)
(8 13 12 2)
)
wall plugWall
(
(0 5 11 6)
(5 4 10 11)
)
symmetryPlane plugBase
(
(4 3 9 10)
)
empty frontAndBack
(
(0 5 5 1)
(1 5 12 2)
(4 3 12 5)
(8 7 11 13)
(7 6 11 11)
(11 10 9 13)
)
);

mergePatchPairs
(
);

I'm sure I'm doing something silly but if anybody could give me a hand I would really appreciate it.

Thanks
Attached Images
File Type: jpg Screenshot.jpg (61.1 KB, 39 views)
ozzythewise is offline   Reply With Quote

Old   June 10, 2010, 12:50
Default
  #2
Senior Member
 
jeff osborne
Join Date: Mar 2010
Posts: 108
Rep Power: 7
ozzythewise is on a distinguished road
anybody have any thoughts on this?
ozzythewise is offline   Reply With Quote

Old   June 13, 2010, 07:11
Default help
  #3
Member
 
mohsen kh
Join Date: Nov 2009
Posts: 41
Rep Power: 6
mohsenkh599 is an unknown quantity at this point
I want to make a 3d geometry like a tube using blockMesh utility. but it seems like there is no internal mesh in the geometry. is it possible to use the blockmesh to create 3D meshes?
mohsenkh599 is offline   Reply With Quote

Old   June 13, 2010, 11:18
Default
  #4
Senior Member
 
jeff osborne
Join Date: Mar 2010
Posts: 108
Rep Power: 7
ozzythewise is on a distinguished road
Hi,

Yes definitely there is a way. OpenFOAM basically treats anything like a 3D object, so there should be no difference in your setup between 3D and 2D shapes. The difference is that for 2D shapes there is only 1 block in the z-direction (or whatever direction you choose to make it) and with 3D there are >1 blocks. Post your blockMeshDict file and I'll have a look at it.

-J
ozzythewise is offline   Reply With Quote

Old   June 13, 2010, 15:33
Default mesh
  #5
Member
 
mohsen kh
Join Date: Nov 2009
Posts: 41
Rep Power: 6
mohsenkh599 is an unknown quantity at this point
Hi
thank you very much
my 3D mesh is as follows
convertToMeters 0.001;

vertices
(
(3 2 0)
(3 2.5 0)
(3 3 0)
(3 3.5 0)
(3 4 0)
(2 3 0)
(4 3 0)
(3 2 10)
(3 2.5 10)
(3 3 10)
(3 3.5 10)
(3 4 10)
(2 3 10)
(4 3 10)

(3 0 10)
(3 1.5 10)

(3 4.5 10)
(3 6 10)
(0 3 10)
(6 3 10)
(3 0 15)
(3 1.5 15)
(3 3 15)
(3 4.5 15)
(3 6 15)
(0 3 15)
(6 3 15)

);

blocks
(
hex (0 6 2 1 7 13 9 8) (10 10 50) simpleGrading (1 1 1)
hex (6 4 3 2 13 11 10 9) (10 10 50) simpleGrading (1 1 1)
hex (4 5 2 3 11 12 9 10) (10 10 50) simpleGrading (1 1 1)
hex (5 0 1 2 12 7 8 9) (10 10 50) simpleGrading (1 1 1)

hex (14 19 9 15 20 26 22 21) (30 30 50) simpleGrading (1 1 1)
hex (19 17 16 9 26 24 23 22) (30 30 50) simpleGrading (1 1 1)
hex (17 18 9 16 24 25 22 23) (30 30 50) simpleGrading (1 1 1)
hex (18 14 15 9 25 20 21 22) (30 30 50) simpleGrading (1 1 1)
);

edges
(
arc 0 6 (3.707106781 2.292893219 0)
arc 7 13 (3.707106781 2.292893219 10)
arc 6 4 (3.707106781 3.707106781 0)
arc 13 11 (3.707106781 3.707106781 10)
arc 4 5 (2.292893219 3.707106781 0)
arc 11 12 (2.292893219 3.707106781 10)
arc 5 0 (2.292893219 2.292893219 0)
arc 12 7 (2.292893219 2.292893219 10)

arc 14 19 (5.121320344 0.878679656 10)
arc 20 26 (5.121320344 0.878679656 15)
arc 19 17 (5.121320344 5.121320344 10)
arc 26 24 (5.121320344 5.121320344 15)
arc 17 18 (0.878679656 5.121320344 10)
arc 24 25 (0.878679656 5.121320344 15)
arc 18 14 (0.878679656 0.878679656 10)
arc 25 20 (0.878679656 0.878679656 15)
);

patches
(
wall fixedwalls
(
(0 6 13 7)
(6 4 11 13)
(4 5 12 11)
(5 0 7 12)

(14 19 26 20)
(19 17 24 26)
(17 18 25 24)
(18 14 20 25)
)
patch inlet
(
(0 6 2 1)
(6 4 3 2)
(4 5 2 3)
(5 0 1 2)


)
patch outlet
(

(26 20 21 22)
(24 26 22 23)
(25 24 23 22)
(20 25 22 21)
)


);

mergePatchPairs
(
);
mohsenkh599 is offline   Reply With Quote

Old   June 13, 2010, 20:55
Default
  #6
Senior Member
 
jeff osborne
Join Date: Mar 2010
Posts: 108
Rep Power: 7
ozzythewise is on a distinguished road
Hey,

I checked out your file, it looks good to me. I think what happens is that paraView doesn't show all the internal lines because if they did the second you rotated the image in any direction is would be a complete mess, so it just shows the lines for the cells on the outside face. But, if you take a slice through any point, you still see the lines, which to me means that you do in fact have an internal geometry. Try running a simulation and see if you get any problems.

Note also, you have 8 undefined faces. Not sure where they are but you should double check that you have everything properly named.

Good luck
-J
ozzythewise is offline   Reply With Quote

Old   January 31, 2011, 10:41
Default Undefined faces
  #7
Member
 
Join Date: Dec 2009
Posts: 39
Rep Power: 7
marval is on a distinguished road
Quote:
Originally Posted by ozzythewise View Post
Hello all,

I am trying to create a mesh with OF and I get this warning when I compile:

--> FOAM Warning :
From function polyMesh:olyMesh(... construct from shapes...)
in file meshes/polyMesh/polyMeshFromShapeMesh.C at line 577
Found 1 undefined faces in mesh; adding to default patch.

Now usually I know that means that one face isn't defined in my patches but for the life of me I can't figure out where. In addition, when I open up paraview I cannot see any default patches to help me identify where I forgot to define it. I've attached a screenshot of my paraview window with the object inspector open. Notice how there is no place to select default patches. Below is also a copy of my blockMeshDict file:

convertToMeters 1;

vertices
(
(0 1.438 0) //0
(0.534 2.28 0) //1
(0.534 8.0353 0) //2
(8.053 0 0) //3
(3.4512 0 0) //4
(3.4512 0.719 0) //5
(0 1.438 0.1) //6
(0.534 2.28 0.1) //7
(0.534 8.0353 0.1) //8
(8.053 0 0.1) //9
(3.4512 0 0.1) //10
(3.4512 0.719 0.1) //11
(8.021 0.719 0) //12
(8.021 0.719 0.1) //13
);

blocks
(
hex (0 5 5 1 6 11 11 7) (10 10 1) simpleGrading (1 1 1)
hex (1 5 12 2 7 11 13 8) (10 10 1) simpleGrading (1 1 1)
hex (4 3 12 5 10 9 13 11) (10 10 1) simpleGrading (1 1 1)

);

edges
(
simpleSpline 0 5 (
(0.5752 1.114 0)
(1.15 0.9347 0)
(2.013 0.7909 0)
)
simpleSpline 6 11(
(0.5752 1.114 0.1)
(1.15 0.9347 0.1)
(2.013 0.7909 0.1)
)
arc 2 12 (5.694 5.694 0)
arc 8 13 (5.694 5.694 0.1)
arc 12 3 (8.04496 0.3598 0)
arc 13 9 (8.04496 0.3598 0.1)
);

patches
(
patch exhaustInlet
(
(7 1 0 6)
)
patch externalInlet
(
(8 2 1 7)
)
patch Outlet
(
(13 9 3 12)
(8 13 12 2)
)
wall plugWall
(
(0 5 11 6)
(5 4 10 11)
)
symmetryPlane plugBase
(
(4 3 9 10)
)
empty frontAndBack
(
(0 5 5 1)
(1 5 12 2)
(4 3 12 5)
(8 7 11 13)
(7 6 11 11)
(11 10 9 13)
)
);

mergePatchPairs
(
);

I'm sure I'm doing something silly but if anybody could give me a hand I would really appreciate it.

Thanks
Hi Jeff!

Have you solved the undefined face -problem yet? I also have the same issue that paraView doesn't display the defaultFaces. And I also got only 1 undefined face.

Regards
Marco
marval is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Distributed ParaView and PV3FoamReader micalil OpenFOAM Paraview & paraFoam 4 July 1, 2010 05:09
paraFoam reader for OpenFOAM 1.6 smart OpenFOAM Installation 13 November 16, 2009 22:41
Courant number, patches, etc oort OpenFOAM 1 July 24, 2009 18:05
ParaView patch visualisation error in Development version philippose OpenFOAM Paraview & paraFoam 17 March 26, 2007 06:45
Undefined internal faces becoming default patches hjasak OpenFOAM Pre-Processing 1 June 16, 2006 10:25


All times are GMT -4. The time now is 08:27.