CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: blockMesh (http://www.cfd-online.com/Forums/openfoam-meshing-blockmesh/)
-   -   2-D axisymmetric Problem (http://www.cfd-online.com/Forums/openfoam-meshing-blockmesh/79125-2-d-axisymmetric-problem.html)

Lesh2Flash August 13, 2010 07:49

2-D axisymmetric Problem
 
Hello Guys !

Im absolutly new at using OpenFoam and also Linux , so Im sorry If Im going to ask dumb questions :-) .

Im trying to Simulate a flow around a spherical particle , but I have some problems using the blockMeshDict to Create a 2-D axisymmetric geometry.
I already created the wedge, and tried to get the "hole" inside the geometry with the edge command, but it dont seems to work. I just created two Verticles and tried to get them connected with edge, but after blockMeshing I dont see the edge in paraFoam.

Can anybody help me or give me some advice to find a solution for my problem ?

Thanks alot !

Lesh

andrewfedosov December 18, 2010 09:27

paraFoam shows you blocks and edges which are parts of blocks. If the edge is free, you wouldn't see it.

For more details - show your blockMeshDict file


All times are GMT -4. The time now is 05:11.