CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: blockMesh

CheckMesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 23, 2012, 13:02
Default CheckMesh
  #1
Senior Member
 
Goutam Saha
Join Date: Dec 2011
Location: UK
Posts: 128
Rep Power: 5
Goutam is on a distinguished road
Dear friends, I am getting following massage using CheckMesh command:
Please see the highlighted line (red color):

Do you know why this is happening?

Create time
Create polyMesh for time = 0
Time = 0
Mesh stats
points: 4851
faces: 12800
internal faces: 11200
cells: 4000
boundary patches: 5
point zones: 0
face zones: 0
cell zones: 0
Overall number of cells of each type:
hexahedra: 4000
prisms: 0
wedges: 0
pyramids: 0
tet wedges: 0
tetrahedra: 0
polyhedra: 0
Checking topology...
Boundary definition OK.
***Total number of faces on empty patches is not divisible by the number of cells in the mesh. Hence this mesh is not 1D or 2D.
Cell to face addressing OK.
Point usage OK.
Upper triangular ordering OK.
Face vertices OK.
Number of regions: 1 (OK).
Checking patch topology for multiply connected surfaces ...
Patch Faces Points Surface topology
topWall 80 105 ok (non-closed singly connected)
bottomWall 80 105 ok (non-closed singly connected)
leftWall 80 105 ok (non-closed singly connected)
rightWall 80 105 ok (non-closed singly connected)
frontAndBack 400 462 ok (non-closed singly connected)
Checking geometry...
Overall domain bounding box (0 0 0) (10 5 10)
Mesh (non-empty, non-wedge) directions (1 0 1)
Mesh (non-empty) directions (1 0 1)
All edges aligned with or perpendicular to non-empty directions.
Boundary openness (0 0 0) OK.
Max cell openness = 0 OK.
Max aspect ratio = 1 OK.
Minumum face area = 0.25. Maximum face area = 0.25. Face area magnitudes OK.
Min volume = 0.125. Max volume = 0.125. Total volume = 500. Cell volumes OK.
Mesh non-orthogonality Max: 0 average: 0
Non-orthogonality check OK.
Face pyramids OK.
Max skewness = 1.9984e-14 OK.
Coupled point location match (average 0) OK.
Mesh OK.
End
Goutam is offline   Reply With Quote

Old   February 24, 2012, 11:56
Default
  #2
Senior Member
 
Join Date: Mar 2011
Posts: 174
Rep Power: 6
anon_a is on a distinguished road
It is quite self-explanatory.
checkMesh first checks if the mesh is 1D or 2D.
Let me guess... you have a 3D mesh! :-)
anon_a is offline   Reply With Quote

Old   February 24, 2012, 12:22
Default
  #3
Senior Member
 
Goutam Saha
Join Date: Dec 2011
Location: UK
Posts: 128
Rep Power: 5
Goutam is on a distinguished road
I have solved my problem. I copied the problem and then changed the blockMeshDict file. So, when I did blockMesh, its not reading my present file (2D mesh). Finally I kill my present file and created a new blockMeshDict file. After that I found its working.

Thanks
Goutam is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to delete cells in OF based on CheckMesh? AndTen OpenFOAM Meshing & Mesh Conversion 13 June 24, 2015 04:09
failed checkMesh after converting from .msh: non closed cells phsieh2005 OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 11 September 20, 2012 08:51
Issue in checkMesh (?) jms OpenFOAM 0 April 14, 2011 10:52
checkMesh Error - Number of regions: 5 lentschi OpenFOAM Meshing & Mesh Conversion 1 March 11, 2011 05:35
CheckMesh for mesh quality gdbaldw OpenFOAM Meshing & Mesh Conversion 2 October 18, 2007 00:11


All times are GMT -4. The time now is 20:23.