[snappyHexMesh] Snappyhexmesh- pont inside mesh

Dr.Faustus · July 24, 2012, 05:42

hi to everybody

i'm founding great difficulties to find the internal point of the mesh
(moreover, i'm not so sure of what this point does)

even if i insert a point on the bounding box it will be shown an error message like this...

Code:

--> FOAM FATAL ERROR: 
Point (0 0 1.9) is not inside the mesh or on a face or edge.
Bounding box of the mesh:(-4 -1.95 -4) (8 0.05 4)

elvis · July 25, 2012, 04:02

Hi,

there is a brilliant tutorial (download and untar it "tar -xzf ") I believe it will guide you throught most of your SHM questions

Dr.Faustus · July 25, 2012, 05:37

Sorry, but the link doesn't work

Anyway i've found the problem: i was building a blockmesh with an incorrect position of vertexs, so the system of reference was badly rotated

Eloise · August 17, 2012, 07:03

Hi!
The link to this tutorial is dead, could you update it?
Thanks

colinB · August 17, 2012, 07:57

Hey there,

the site mentioned above is under attack as you can read here:

http://www.cfd-online.com/Forums/ope...er-attack.html

so I guess so far there is no alternative link until everything is restored

regards

July 24, 2012, 05:42	Snappyhexmesh- pont inside mesh	#1
Dr.Faustus New Member Alessandro Pani Join Date: Jul 2012 Posts: 21 Rep Power: 13	hi to everybody i'm founding great difficulties to find the internal point of the mesh (moreover, i'm not so sure of what this point does) even if i insert a point on the bounding box it will be shown an error message like this... Code: --> FOAM FATAL ERROR: Point (0 0 1.9) is not inside the mesh or on a face or edge. Bounding box of the mesh:(-4 -1.95 -4) (8 0.05 4)

July 25, 2012, 04:02		#2
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi, there is a brilliant tutorial (download and untar it "tar -xzf ") I believe it will guide you throught most of your SHM questions wyldckat likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] snappyHexMesh Boundary Layer at Corner	panpanzhong	OpenFOAM Meshing & Mesh Conversion	5	July 3, 2018 05:53
[snappyHexMesh] problem with snappyHexMesh	kanes	OpenFOAM Meshing & Mesh Conversion	10	January 26, 2016 06:11
[snappyHexMesh] Error with a turbine mesh with SnappyHexMesh	DOliveira	OpenFOAM Meshing & Mesh Conversion	1	July 16, 2015 08:02
[snappyHexMesh] Inside and outside mesh with snappyhexmesh	nzy102	OpenFOAM Meshing & Mesh Conversion	0	August 31, 2008 23:50
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

July 25, 2012, 05:37		#3
Dr.Faustus New Member Alessandro Pani Join Date: Jul 2012 Posts: 21 Rep Power: 13	Sorry, but the link doesn't work Anyway i've found the problem: i was building a blockmesh with an incorrect position of vertexs, so the system of reference was badly rotated

August 17, 2012, 07:03		#4
Eloise Senior Member Eloïse Join Date: Jul 2012 Location: Trondheim, Norway Posts: 113 Rep Power: 13	Hi! The link to this tutorial is dead, could you update it? Thanks

August 17, 2012, 07:57		#5
colinB Senior Member Join Date: Aug 2010 Location: Groningen, The Netherlands Posts: 216 Rep Power: 18	Hey there, the site mentioned above is under attack as you can read here: http://www.cfd-online.com/Forums/ope...er-attack.html so I guess so far there is no alternative link until everything is restored regards