CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Open Source Meshers: Gmsh, Netgen, CGNS, ... (http://www.cfd-online.com/Forums/openfoam-meshing-open/)
-   -   Problem with Quadrangle Meshing in Salome (http://www.cfd-online.com/Forums/openfoam-meshing-open/110645-problem-quadrangle-meshing-salome.html)

vainilreb December 17, 2012 04:32

Problem with Quadrangle Meshing in Salome
 
Hi,

I'm trying to mesh a surface like the green one in the example shown in the attachments. When I try to use quadrangulation, Salome returns the error description "Unexpected geometry. Wrong number of wires: 2".

I really need help on this, because I don't want to change to triangulation.

Thanks a lot.

Robert


All times are GMT -4. The time now is 19:48.