CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Open Source Meshers: Gmsh, Netgen, CGNS, ...

Problem with Quadrangle Meshing in Salome

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 17, 2012, 03:32
Default Problem with Quadrangle Meshing in Salome
  #1
Member
 
Robert
Join Date: Aug 2012
Location: Berlin
Posts: 74
Rep Power: 4
vainilreb is on a distinguished road
Hi,

I'm trying to mesh a surface like the green one in the example shown in the attachments. When I try to use quadrangulation, Salome returns the error description "Unexpected geometry. Wrong number of wires: 2".

I really need help on this, because I don't want to change to triangulation.

Thanks a lot.

Robert
vainilreb is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with querying the meshing database in CFX-Pre ashtonJ CFX 4 August 15, 2014 20:55
[Other] Hex meshing problem DM12 patrick ANSYS Meshing & Geometry 6 February 28, 2013 16:32
Strange ANSYS Meshing 13.0 Problem brunob ANSYS Meshing & Geometry 3 June 21, 2011 20:03
[ICEM] ICEM meshing problem xyq102296 ANSYS Meshing & Geometry 6 October 28, 2010 10:09
Meshing problem in GAMBIT Vidya Raja FLUENT 0 May 20, 2006 23:31


All times are GMT -4. The time now is 14:53.