|
[Sponsors] |
December 9, 2013, 06:29 |
Gmsh and 3d mesh
|
#1 |
New Member
Join Date: Dec 2013
Posts: 3
Rep Power: 12 |
Hello every one
I used to work with gmsh but now I have problem with it. I want to create a 3d mesh in a volume which it has more than 6 faces... (Gmsh's Transfinite algorithm is only available for 5- and 6-face volumes !!!). Do you Know How can I create a 3d mesh with gmsh in a volume which has more than six face or can you propose me any other open source mesher which can do it this? Thank you in advance |
|
December 9, 2013, 07:29 |
|
#2 |
Member
Join Date: Nov 2012
Posts: 58
Rep Power: 13 |
I have been very satisfied with SALOME (http://www.salome-platform.org/).
But there are many others, like snappyHexMesh, blockMesh, swiftSnap, swiftBlock, ENGRID... Just search around. Also, this image may help you for the conversion: http://openfoamwiki.net/images/e/e4/...Conversion.svg |
|
December 11, 2013, 15:41 |
|
#3 |
New Member
Join Date: Dec 2013
Posts: 3
Rep Power: 12 |
thanks a lot
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|