 |
 |
 |
|
|
|
[Sponsors] | ||||
March 7, 2014, 05:40
|
From 3D mesh to 2D mesh
|
#1 |
|
Member
Alex
Join Date: Apr 2010
Posts: 48
Rep Power: 15  |
I have a 3D mesh (a box provided with an inlet pipe and an outlet one) for which I need only a slice of it (2D) to make calculations, along the inlet/outlet pipes, since in my case the 2D can be assumed a good approximation. I would like to extract the slice from the 3D mesh I have available, in order to have the correspondent 2D mesh at a fixed plane. Does anyone know how to perform this in a clear way, using the OpenFOAM tools? I already tried to have a look to the meshing tools, but I haven't a clear idea on how to use them for my purpose. Thanks in advance. alex
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
| Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
| [ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 06:41 |
| [ICEM] Problem making structural mesh on a surface | froztbear | ANSYS Meshing & Geometry | 1 | November 10, 2011 08:52 |
| [snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
Linear Mode
