|
[Sponsors] |
January 8, 2014, 11:14 |
Snappyhexmesh
|
#1 |
New Member
Join Date: Jul 2013
Posts: 27
Rep Power: 12 |
Hi all,
I am a newbie to OpenFOAM and Snappyhexmesh, I have read most of the threads regarding SHM in the forum, but I couldn't make out of that. I wanted to create a semicircular cut in a square mesh. I made a '.stl file' in Autocad and placed it in the 'triSurface'. Tried to execute the blockmesh and shm, but I could see only the blockmesh generated square in paraview finally. Can any one plesse suggest me the steps to work with SHM to make such a geometry. Am I doing some blunders? Any hint will be a privilege . Thanks in advance regards Sujatha |
|
January 9, 2014, 10:10 |
|
#2 |
Senior Member
Nima Samkhaniani
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,266
Blog Entries: 1
Rep Power: 24 |
did you call the stl file in snappyHexMesh at all?
There are lots of stuff about snappyHexMesh in Internet, so just google it
__________________
My Personal Website (http://nimasamkhaniani.ir/) Telegram channel (https://t.me/cfd_foam) |
|
January 9, 2014, 13:14 |
|
#3 |
New Member
Join Date: Jul 2013
Posts: 27
Rep Power: 12 |
Thanks a million "nimasam", for your response.
I got something now, even though there are some errors while modelling, I am getting the geometry now. For sure I will search the web and will read more on that. Thanks again for your effort. regards Sujatha |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[CAD formats] Creating waterproof STL using snappyHexMesh or salome | Tobi | OpenFOAM Meshing & Mesh Conversion | 58 | May 13, 2020 06:01 |
[snappyHexMesh] Running snappyHexMesh in parallel - optimizing | peterhess | OpenFOAM Meshing & Mesh Conversion | 2 | January 3, 2018 02:54 |
[snappyHexMesh] Tutorial crashes: snappyHexMesh floating point exception. | jasv | OpenFOAM Meshing & Mesh Conversion | 4 | May 10, 2016 02:55 |
[snappyHexMesh] snappyhexmesh doesn't creat mesh in parallel issue? | klausb | OpenFOAM Meshing & Mesh Conversion | 1 | March 7, 2015 11:55 |
[snappyHexMesh] stitchMesh and snappyHexMesh | gdbaldw | OpenFOAM Meshing & Mesh Conversion | 0 | December 23, 2009 02:09 |