 |
 |
 |
|
|
|
[Sponsors] | ||||
February 17, 2014, 16:16
|
Creating Mesh for double body
|
#1 |
|
New Member
Tobias W.
Join Date: Feb 2014
Posts: 1
Rep Power: 0  |
Hello, I'm new at OF and I'm trying to create a mesh for double body flow. The problem is I've got a stl-file with two solids. Once the solid for the submerged part of the ship and on the other hand the solid for the area above the waterline. For double body flow I only need the submerged solid, Creating a symmetry plane at waterline area to avoid influence of the free surface. Is it possible to create a block mesh that only depends on the draught?
Happy if you could help me. |
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [mesh manipulation] How to write cellSet for different regions in constant/polyMesh/sets | Struggle_Achieve | OpenFOAM Meshing & Mesh Conversion | 3 | June 17, 2019 09:29 |
| Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
| [snappyHexMesh] dynamic mesh: rotating body with increasing/decreasing distance to fixed body | mo_na | OpenFOAM Meshing & Mesh Conversion | 3 | July 26, 2016 04:51 |
| [snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
| [ICEM] Generating Mesh for STL Car in Windtunnel Simulation | tommymoose | ANSYS Meshing & Geometry | 48 | April 15, 2013 04:24 |
Linear Mode
