CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Open Source Meshers: Gmsh, Netgen, CGNS, ...

export STL format

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 11, 2015, 06:44
Default export STL format
  #1
New Member
 
samira
Join Date: Feb 2015
Location: Iran
Posts: 16
Rep Power: 3
samiraamiri is on a distinguished road
Dear all,

I write script python for geometry airfoil in Salome-Meca 2015 . when I export it to .stl, the file has only
begin solid
end solid
and nothing in between! I would appreciate if you could send me steps for doing this export..

Best regards

Samira
samiraamiri is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
STL file modification and export Crank-Shaft Main CFD Forum 0 November 25, 2014 10:04
Unable to install OpenFOAM 1.6-ext Maimouna OpenFOAM Installation 23 May 8, 2014 05:47
[Workbench] Meshing and export mesh from STL geometry alerfreire ANSYS Meshing & Geometry 0 March 26, 2013 10:25
Export to Abaqus input format jai CFX 1 July 21, 2010 04:53
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08


All times are GMT -4. The time now is 10:22.