CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Gmsh] Gmsh and degenerated hexaedron

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 7, 2005, 04:43
Default Gmsh and degenerated hexaedron
  #1
Senior Member
 
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26
mattijs is on a distinguished road
You could modify your geometry so it doesn't become an exact wedge but still has small faces at the axis.

Or try running colllapseEdges which will collapse small/zero-sized edges. No guarantee though since your mesh is already invalid (duplicate vertices in face)
mattijs is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GMSH Error: Degenerated Hexahedron in extrusion of volume hemaditya Mesh Generation & Pre-Processing 0 June 23, 2016 05:51


All times are GMT -4. The time now is 06:41.