[vanmaercke]

Hello,

I don't really know whether a satisfying solution for converting CAD shapes into OpenFOAM meshes is already available. But I have written a small tool to easily create OpenFOAM Meshes from CAD files (IGES and STEP). If anyone is interested i can put it available for download...
The way i proceeded is as follows:
1)Using OpenCasCade import the CAD file.
2)Let the user assign Boundary conditions and material properties using a simple GUI based on Qt.
3) Create a quality surface mesh for the imported shapes (Using an adapted version of the STL mesh generator of OpenCascade to avoid sharp angle triangles which yield problems further on...)
4)Translate this surface mesh to an Tetgen input file and generate the mesh.
5)Using an adapted version of netgenToFoam (for reading in Tetgen files) the mesh is converted to an OpenFOAM mesh. (i have seen that tetgenToFOAM also exists already but i was unable find it..)

If anyone is interested i will put it online for download. However be warned: i'm not a programmer and my code is in no way (even remotely) as beautiful as the code of openFOAM ;-)

Regards,

Simon

[vinz]

Hi Simon,

It look intersting!
Could you post some picture of tetings that you did?
I might be interested by your set of tools.

Regards,

Vincent

[stefano]

Hi Simon,

your code could be a solution, or a consistent starting point, for my CAD-import daily problems.
To post online the code for download should be a good idea!

Thanks,

Stefano

[vanmaercke]

Hi,

I will make the program available for download very shortly then... I will first have to make it more easily redistributable...
I have created some screenshots and placed them on the following website:

http://student.studentenweb.org/

The examples do not have any significance but they illustrate that a mesh can be created starting from a cad file. And the colours are beautiful...

Regards,
Simon

[philippose]

Hello,

Good evening!

I have been using OpenFOAM for over a year now, and I exclusively use models I export from Pro-Engineer for the cases.

Since I work in the field of Hydraulic valve development, the geometry is almost never trivial.

What I do is to use Netgen :-)! (Available for both windows, and Linux. And.... also...is open source).

Netgen does exactly what you have done.... it imports STEP / IGES files which can be exported from the CAD Environment using the OpenCascade libraries.

And then it uses its own internal edge, surface and volume mesh generation algorithms (which are extremely robust....uses Advancing front Delaunay Meshing) to generate the mesh. Various factors which govern the mesh generation can ofcourse... be adjusted.

After that I can choose surfaces of the geometry to which I can assign numbers which are used in OpenFOAM for boundary condition definitions.

Finally.... as you already know, netgenToFoam already exists in OpenFOAM.

So... here it is.... a streamlined pathway from CAD -> OpenFOAM :-)!

Enjoy!

Philippose

[benru]

I use SALOME-3.2.6. It contains as OpenCASCAD as NETGEN (and TETGEN, and Hex) algorithms. And it can import IGES & STEP files, after that it possible to generate a mesh with patches, write it as ideas unv file and with ideasUnvToFoam convert to OpenFoam.

You can see theme SALOME-NETGEN-OPENFOAM in MESH part of forum.

[marco2]

Philippose

How do you control in netgen different grid refinements on different surfaces (i.e. different boundaries) ?
Do you set boundary patches on mesh surface or on geometry ?
Do you know how to use the "insert virtual boundary layer" command under the special menu ?

Regards

Marco

[vinu]

Hi,,


I found a free tool called Descretizer. This tool is directly interfaced with OpenFOAM. I dont know why no one is using that. I find it very useful.

The link for discretizer is http://www.discretizer.org/

[nomad]

How can I create a 2D mesh from a 3D model exported as IGES, STEP, or STL from SolidWorks?
Can I do this in a mesh generator or in OpenFOAM?
I'm currently using NetGen for mesh generation.

Thanks.

[nomad]

I suppose it's just a mesh which is one cell thick.

[fiona]

Hi Philippose,

I'm new to Netgen. Followed the instructions, I installed OpenCascade in order to import STEP file into Netgen, but I could not find the commandline options. Do you know how to?

Thanks,

Fiona

[Linse]

Originally Posted by nomad

How can I create a 2D mesh from a 3D model exported as IGES, STEP, or STL from SolidWorks?
Can I do this in a mesh generator or in OpenFOAM?
I'm currently using NetGen for mesh generation.

Thanks.

Originally Posted by nomad

I suppose it's just a mesh which is one cell thick.

At least that is what it says in the user's guide for OpenFOAM.
Seems OpenFOAM is explicitly designed for 3d-cases and the 1-cell-thickness is the only way to use it kind of 2d...

[run_cfd]

Originally Posted by benru

I use SALOME-3.2.6. It contains as OpenCASCAD as NETGEN (and TETGEN, and Hex) algorithms. And it can import IGES & STEP files, after that it possible to generate a mesh with patches, write it as ideas unv file and with ideasUnvToFoam convert to OpenFoam.

You can see theme SALOME-NETGEN-OPENFOAM in MESH part of forum.

Hi Ruben,

Greetings!!!

Could you please help me in finding and installing the SALOME- 3.2.6.
Or, could you help me in in getting the OpenCascade geometry kernel as demanded by the Netgen install to import iges file. i already have installed Netgen, but have no idea how to get OpenCascade geometry kernel and how to club it with the netgen installation. I need to import a iges file converted in Hypermesh from the Autocad dxf file.

Thanks in advance,

MLD

[elvis]

Hello Manoj,

why do you want to install SALOME- 3.2.6? http://www.salome-platform.org/downloads/salome-v3.2.6
http://www.salome-platform.org/downloads/salome-v5.1.5
Opencascade is incorporated into Salome so you can work with it right after installing.
Netgen and gmsh are some of the meshing opportunites in Salome.
http://www.caelinux.org/wiki/index.php/Doc:CAETutorials might be some additional documentation for working with Salome

[alixcattermole]

Hello,

I am trying to convert a netgen mesh into openfoam but whenever I use the netgenNeutralToFoam [filename.neutral] command I get and error in openfoam saying FOAM FATAL IO ERROR: cannot find file.
Any ideas at how I can get around this?
Thanks.