[Commercial meshers] Hypermesh, connecting surfaces

Schuschi · November 6, 2010, 04:55

Hi,

I've been working with Hypermesh for 1 week and need some help. I've got some problems with connecting the created meshes for the calculation. I have drawn and meshed the parts I needed and put the boundary conditions and forces on different elements. When I simulated the results in hyperview the part with the force is gone and the other parts have no displacement so I think they arent connected. The meched surfaces don't touch each other but the thickness of the meched surfaces should exactely touch.
Which commands do I have to use for connecting the parts.

Many thanks.

vnpenguin · November 7, 2010, 03:27

Are you talking about OpenFOAM computation with mesh made by Hypermesh?

November 6, 2010, 04:55	Hypermesh, connecting surfaces	#1
Schuschi New Member Schuschi Join Date: Nov 2010 Posts: 1 Rep Power: 0	Hi, I've been working with Hypermesh for 1 week and need some help. I've got some problems with connecting the created meshes for the calculation. I have drawn and meshed the parts I needed and put the boundary conditions and forces on different elements. When I simulated the results in hyperview the part with the force is gone and the other parts have no displacement so I think they arent connected. The meched surfaces don't touch each other but the thickness of the meched surfaces should exactely touch. Which commands do I have to use for connecting the parts. Many thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Extracting results on multiple surfaces	sunilpatil	FLUENT	0	October 21, 2018 11:15
NURBS surfaces on a wing	frossi	CFX	5	February 5, 2017 15:27
[snappyHexMesh] SHM not snapping to some surfaces	Swift	OpenFOAM Meshing & Mesh Conversion	13	January 4, 2016 01:56
[DesignModeler] Connecting surfaces	Nachetres	ANSYS Meshing & Geometry	0	December 1, 2014 04:25
Modeling both radiation and convection on surfaces - Ansys Transient Thermal R13	s.mishra	ANSYS	0	March 31, 2012 04:12

November 7, 2010, 03:27		#2
vnpenguin New Member VNPenguin Join Date: Apr 2010 Posts: 19 Rep Power: 16	Are you talking about OpenFOAM computation with mesh made by Hypermesh?